ĸ€ ĺ© ĸ‰ ň† Åœ° System Design

Prof. Furong GAO's Publications

Year: Show All | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996

Article

Tang, Xiaopeng; Gao, Furong; Liu, Kailong; Liu, Qi; Foley, Aoife M., "A Balancing Current Ratio based State-of-Health Estimation Solution for Lithium-ion Battery Pack", IEEE Transactions on Industrial Electronics, September 2021, p. 1-1 (2021)

Li, Dong; Sun, Xin; Gao, Furong; Liu, Shulin, "An improved real-valued negative selection algorithm based on the constant detector for anomaly detection", JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, v. 40, (5), 22 April 2021, p. 8793-8806 (2021)

Tang, Xiaopeng; Liu, Kailong; Liu, Qi; Peng, Qiao; Gao, Furong, "Comprehensive study and improvement of experimental methods for obtaining referenced battery state-of-power", Journal of Power Sources, v. 512, November 2021, article number 230462 (2021)

Wang, Limin; Song, Jiang; Zhang, Ridong; Gao, Furong, "Constrained model predictive fault-tolerant control for multi-time-delayed batch processes with disturbances: A Lyapunov-Razumikhin function method", Journal of the Franklin Institute, October 2021 (2021)

Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin, "Continual learning classification method and its application to equipment fault diagnosis", Applied Intelligence, 12 May 2021 (2021)

Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin, "Continual learning classification method for time-varying data space based on artificial immune system", JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, v. 40, (5), 22 April 2021, p. 8741-8754 (2021)

Li, Dong; Liu, Shulin; Gao, Furong; Sun, X., "Continual learning classification method with constant-sized memory cells based on the artificial immune system", Knowledge-Based Systems, v. 213, February 2021, article number 106673 (2021)

Gao, Kaihua; Lu, Jingyi; Xu, Zuhua; Gao, Furong, "Control-Oriented Two-Dimensional Online System Identification for Batch Processes", Industrial & Engineering Chemistry Research, 13 May 2021 (2021)

Zhou, Yuanqiang; Gao, Kaihua; Li, Dewei; Xu, Zuhua; Gao, Furong, "Data-Efficient Constrained Learning for Optimal Tracking of Batch Processes", Industrial and Engineering Chemistry Research, v. 60, (43), 19 November 2021, p. 15658-15668 (2021)

Wang, Nan; Li, Haisheng; Wu, Feng; Zhang, Ridong; Gao, Furong, "Fault Diagnosis of Complex Chemical Processes Using Feature Fusion of a Convolutional Network", Industrial and Engineering Chemistry Research, v. 60, (5), February 2021, p. 2232-2248 (2021)

Wang, Limin; Yu, Jingxian; Zhang, Ridong; Li, Ping; Gao, Furong, "Iterative Learning Control for Multiphase Batch Processes With Asynchronous Switching", IEEE Transactions on Systems Man Cybernetics-Systems, v. 51, (4), April 2021, p. 2536-2549 (2021)

Jing, Hua; Zhao, Chunhui; Gao, Furong, "Non-stationary data reorganization for weighted wind turbine icing monitoring with Gaussian mixture model", Computers and Chemical Engineering, v. 147, April 2021, article number 107241 (2021)

Zhou, Yuanqing; Li, Dewei; Gao, Furong, "Optimal synchronization control for heterogeneous multi-agent systems: Online adaptive learning solutions", Asian Journal of Control, August 2021 (2021)

Tao, Jili; Yu, Zheng; Zhang, Ridong; Gao, Furong, "RBF neural network modeling approach using PCA based LM–GA optimization for coke furnace system", Applied Soft Computing, v. 111, November 2021, article number 107691 (2021)

Tang, Xiaopeng; Wang, Yujie; Liu, Qi; Gao, Furong, "Reconstruction of the Incremental Capacity Trajectories from Current-Varying Profiles for Lithium-Ion Batteries", Iscience, v. 24, (10), October 2021, article number 103103 (2021)

Tang, Xiaopeng; Liu, Kailong; Li, Kang; Widanage, Widanalage Dhammika; Kendrick, Emma; Gao, Furong, "Recovering Large-scale Battery Aging Dataset With Machine Learning", Patterns, v. 2, (8), 13 August 2021, article number 100302 (2021)

Zhang, Ridong; Gao, Furong, "Two-Dimensional Iterative Learning Model Predictive Control for Batch Processes: A New State Space Model Compensation Approach", IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 51, (2), February 2021, p. 833-841 (2021)

Zhang, Ridong; Gao, Furong, "A New Synthetic Minmax Optimization Design of H∞ LQ Tracking Control for Industrial Processes under Partial Actuator Failure", IEEE Transactions on Reliability, v. 69, (1), March 2020, article number 8601405, p. 322-333 (2020)

Qu, Hongyi; Li, Dewei; Zhang, Ridong; Yang, Shuang-Hua; Gao, Furong, "A more general incremental inter-agent learning adaptive control for multiple identical processes in mass production", Neurocomputing, v. 397, July 2020, p. 70-93 (2020)

Tang, Xiaopeng; Liu, Kailong; Lu, Jingyi; Liu, Boyang; Wang, Xin; Gao, Furong, "Battery incremental capacity curve extraction by a two-dimensional Luenberger–Gaussian-moving-average filter", Applied Energy, v. 280, 15 September 2020, article number 115895 (2020)

Li, Dong; Liu, Shulin; Gao, Furong; Sun, Xin, "Continual learning classification method with new labeled data based on the artificial immune system", Applied Soft Computing Journal, v. 94, September 2020, article number 106423 (2020)

Jiang, Qingchao; Yan, Xuefeng; Yi, Hui; Gao, Furong, "Data-Driven Batch-End Quality Modeling and Monitoring Based on Optimized Sparse Partial Least Squares", IEEE Transactions on Industrial Electronics, v. 67, (5), May 2020, p. 4098-4107 (2020)

Jiang, Qingchao; Yan, Shifu; Yan, Xuefeng; Yi, Hui; Gao, Furong, "Data-Driven Two-Dimensional Deep Correlated Representation Learning for Nonlinear Batch Process Monitoring", IEEE Transactions on Industrial Informatics, v. 16, (4), April 2020, p. 2839-2848 (2020)

Li, Ziwei; Xu, Zheng; Zhang, Ridong; Zou, Hongbo; Gao, Furong, "Design of Modified 2-Degree-of-Freedom Proportional–Integral–Derivative Controller for Unstable Processes", Measurement and Control (United Kingdom), July 2020 (2020)

Wang, Limin; Li, Bingyun; Zhang, Ridong; Gao, Furong, "Design of a Switching Control Strategy for Time-Varying Delay Batch Processes Using Fault Probability-Based Average Dwell Time Method", Industrial & Engineering Chemistry Research, v. 59, (11), March 2020, p. 5087-5102 (2020)

Teng, Yiming; Hu, Dewen; Wu, Feng; Zhang, Ridong; Gao, Furong, "Fast economic model predictive control for marine current turbine generator system", Renewable Energy, v. 166, April 2020, p. 108-116 (2020)

Wang, Nan; Yang, Fan; Zhang, Ridong; Gao, Furong, "Intelligent Fault Diagnosis for Chemical Processes Using Deep Learning Multimodel Fusion", IEEE Transactions on Cybernetics, 2020 (2020)

Liu, Boyang; Tang, Xiaopeng; Gao, Furong, "Joint estimation of battery state -of -charge and state -of -health based on a simpli fied pseudo -two-dimensional model", Electrochimica Acta, v. 344, June 2020 (2020)

Liu, Boyang; Tang, Xiaopeng; Gao, Furong, "Joint estimation of battery state-of-charge and state-of-health based on a simplified pseudo-two-dimensional model", Electrochimica Acta, 1 April 2020, article number 136098 (2020)

Zou, Xiaoyu; Zhao, Chunhui; Gao, Furong, "Linearity Decomposition-Based Cointegration Analysis for Nonlinear and Nonstationary Process Performance Assessment", Industrial and Engineering Chemistry Research, v. 59, (7), February 2020, p. 3052-3063 (2020)

Tang, Xiaopeng; Liu, Kailong; Wang, Xin; Gao, Furong; Marco, James; Widanage, W. Dhammika, "Model migration neural network for predicting battery aging trajectories", IEEE Transactions on Transportation Electrification, 9 March 2020 (2020)

Zhu, Jinlin; Yao, Y.; Gao, Furong, "Multiphase two-dimensional time-slice dynamic system for batch process monitoring", Journal of Process Control, v. 85, January 202, p. 184-198 (2020)

Yang, Fan; Li, Xiang; Bai, Jianjun; Zhang, Ridong; Gao, Furong, "Nonlinear Process Quality Prediction Using Wavelet Denoising OSC-SVM-PLS", Industrial and Engineering Chemistry Research, v. 59, (13), April 2020, p. 6021-6032 (2020)

Lu, Jingyi; Cao, Zhixing; Hu, Qinran; Xu, Zuhua; Du, Wenli; Gao, Furong, "Optimal Iterative Learning Control for Batch Processes in the Presence of Time-Varying Dynamics", IEEE Transactions on Systems, Man, and Cybernetics: Systems, 2020 (2020)

Li, Dewei; He, Shaoying; Xi, Yugeng; Liu, Tao; Gao, Furong; Wang, Youqing; Lu, Jingyi, "Synthesis of ILC-MPC controller with data-driven approach for constrained batch processes", IEEE Transactions on Industrial Electronics, v.67, (4), April 2020, article number 8691673, p. 3116-3125 (2020)

Lu, Jingyi; Cao, Zhixing; Zhao, Chunhui; Gao, Furong, "110th Anniversary: An Overview on Learning-Based Model Predictive Control for Batch Processes", Industrial and Engineering Chemistry Research, v. 58, (37), September 2019, p. 17164-17173 (2019)

Luo, Weiping; Wang, Limin; Zhang, Ridong; Gao, Furong, "2D Switched Model-Based Infinite Horizon LQ Fault-Tolerant Tracking Control for Batch Process", Industrial and Engineering Chemistry Research, v. 58, (22), June 2019, p. 9540-9551 (2019)

Tang, Xiaopeng; Wang, Yujie; Zou, Changfu; Yao, Ke; Xia, Yongxiao; Gao, Furong, "A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging", Energy Conversion and Management, v. 180, 15 January 2019, p. 162-170 (2019)

Tang, Xiaopeng; Zou, Changfu; Yao, Ke; Lu, Jingyi; Xia, Yongxiao; Gao, Furong, "Aging trajectory prediction for lithium-ion batteries via model migration and Bayesian Monte Carlo method", Applied Energy, v. 254, 15 November 2019, article number 113591 (2019)

Zhu, Jinlin; Wang, Youqing; Zhou, Donghua; Gao, Furong, "Batch Process Modeling and Monitoring With Local Outlier Factor", IEEE Transactions on Control Systems Technology, v. 27, (4), July 2019, article number 8325416, p. 1552-1565 (2019)

Cameron, Ian T.; Engell, Sebastian; Georgakis, Christos; Asprion, Norbert; Bonvin, Dominique; Gao, Furong; Gerogiorgis, Dimitrios I.; Grossmann, Ignacio E.; Macchietto, Sandro; Preisig, Heinz A.; Young, Brent R., "Education in Process Systems Engineering: Why it matters more than ever and how it can be structured", Computers and Chemical Engineering, v. 126, July 2019, p. 102-112 (2019)

Zhang, Shumei; Zhao, Chunhui; Gao, Furong, "Incipient Fault Detection for Multiphase Batch Processes With Limited Batches", IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, v. 27, (1), January 2019, p. 103-117 (2019)

Wang, Limin; Lu, Libin; Gao, Furong; Zhou, Donghua, "Infinite horizon linear quadratic hybrid fault-tolerant control for multi-phase batch process", Huagong Xuebao/CIESC Journal, v. 70, (2), 2019, p. 541-547 (2019)

Tang, Xiaopeng; Gao, Furong; Zou, Changfu; Yao, Ke; Hu, Wengui; Wik, Torsten, "Load-responsive model switching estimation for state of charge of lithium-ion batteries", Applied Energy, v. 238, March 2019, p. 423-434 (2019)

Tang, Xiaopeng; Wang, Yujie; Yao, Ke; He, Zhenwei; Gao, Furong, "Model migration based battery power capability evaluation considering uncertainties of temperature and aging", Journal of Power Sources, v. 440, 15 November 2019, article number 227141 (2019)

Jiang, Qingchao; Gao, Furong; Yan, Xuefeng; Yi, Hui, "Multiobjective Two-Dimensional CCA-Based Monitoring for Successive Batch Processes with Industrial Injection Molding Application", IEEE Transactions on Industrial Electronics, v.66, (5), May 2019, article number 8424187, p. 3825-3834 (2019)

Lu, Jingyi; Cao, Zhixing; Gao, Furong, "Multipoint Iterative Learning Mode Predictive Control", IEEE Transactions on Industrial Electronics, v. 66, (8), August 2019, p. 6230-6240 (2019)

Jiang, Qingchao; Gao, Furong; Yi, Hui; Yan, Xuefeng, "Multivariate Statistical Monitoring of Key Operation Units of Batch Processes Based on Time-Slice CCA", IEEE Transactions on Control Systems Technology, v. 27, (3), May 2019, article number 8301609, p. 1368-1375 (2019)

Li, Xiang; Wu, Feng; Zhang, Ridong; Gao, Furong, "Nonlinear Multivariate Quality Prediction Based on OSC-SVM-PLS", Industrial and Engineering Chemistry Research, v. 58, (19), May 2019, p. 8154-8161 (2019)

Hao, S.; Liu, T.; Gao, Furong, "PI Based Indirect-Type Iterative Learning Control for Batch Processes with Time-Varying Uncertainties: A 2D FM Model Based Approach", Journal of Process Control, v. 78, June 2019, p. 57-67 (2019)

Liu, Yan; Print Email Wang, Fuli; Chang, Yuqing; Gao, Furong; He, Dakuo, "Performance-relevant kernel independent component analysis based operating performance assessment for nonlinear and non-Gaussian industrial processes", Chemical Engineering Science, v.209, December 2019, article number 115167 (2019)

Tang, Xiaopeng; Liu, Kailong; Wang, Xin; Liu, Boyang; Gao, Furong; Widanalage, Dhammika Widanage, "Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries", Journal of Power Sources, v. 440, 15 November 2019, article number 227118 (2019)

Tang, Xiaopeng; Zou, Changfu; Wik, Torsten; Yao, Ke; Xia, Yongxiao; Wang, Yujie; Yang, Duo; Gao, Furong, "Run-to-run control for active balancing of lithium iron phosphate battery packs", IEEE Transactions on Power Electronics, 29 May 2019 (2019)

王立敏; 卢丽彬; 高福荣; 周东华, "多阶段间歇过程无穷时域优化线性二次容错控制", 化工学报=CIESC Journal, v. 70, (2), February 2019, p. 541-547 (2019)

Zhang, Ridong; Wu, Sheng; Cao, Zhixing; Lu, Jingyi; Gao, Furong, "A Systematic Min-Max Optimization Design of Constrained Model Predictive Tracking Control for Industrial Processes against Uncertainty", IEEE Transactions on Control Systems Technology, v. 26, (6), November 2018, article number 8036408, p. 2157-2164 (2018)

Yang, L.; Bo, Cuimei; Li, Jun; Jin, Wanqin; Gao, Furong, "A Two Dimensional Iterative Learning PI Control Method for a Batch Reaction Process [半间歇化学反应过程的二维迭代学习PI控制方法]", Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities, v. 32, (6), December 2018, p. 1403-1411 (2018)

Tang, Xiaopeng; Zou, C.; Yao, Ke; Chen, Guohua; Liu, Boyang; He, Z.; Gao, Furong, "A fast estimation algorithm for lithium-ion battery state of health", Journal of Power Sources, v. 369, August 2018, p. 453-458 (2018)

Shen, Yiteng; Wang, Limin; Yu, Jingxian; Zhang, Ridong; Gao, Furong, "A hybrid 2D fault-tolerant controller design for multi-phase batch processes with time delay", Journal of Process Control, v. 69, Septemer 2018, p. 138-157 (2018)

Qin, Yan; Zhao, Chunhui; Gao, Furong, "An Intelligent Non-optimality Self-recovery Method Based on Reinforcement Learning With Small Data in Big Data Era", Chemometrics and Intelligent Laboratory Systems, v. 176, May 2018, p. 89-100 (2018)

Qu, Hongyi; Li, Dewei; Zhang, Ridong; Gao, Furong, "An incremental Inter-agent learning method for adaptive control of multiple identical processes in mass production", Neurocomputing, v. 315, November 2018, p. 322-344 (2018)

Zhang, Ridong; Lv, Qiang; Tao, Jili; Gao, Furong, "Data Driven Modeling Using an Optimal Principle Component Analysis Based Neural Network and Its Application to a Nonlinear Coke Furnace", Industrial and Engineering Chemistry Research, v. 57, (18), May 2018, p. 6344-6352 (2018)

Wang, Limin; Liu, Bing; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong, "Delay-Range-Dependent-Based Hybrid Iterative Learning Fault-Tolerant Guaranteed Cost Control for Multiphase Batch Processes", Industrial and Engineering Chemistry Research, v.57, (8), February 2018, p. 2932-2944 (2018)

Wang, Limin; Li, Bingyun; Yu, Jingxian; Zhang, Ridong; Gao, Furong, "Design of Fuzzy Iterative Learning Fault-tolerant Control for Batch Processes with Time-varying Delays", Optimal control applications & methods\tOptimal Control Applications and Methods, v.39, (6), November 2018, p. 1887-1903 (2018)

Liu, Yan; Wang, Xiaojun; Wang, Fuli; Gao, Furong, "Gaussian Process Regression and Bayesian Inference Based Operating Performance Assessment for Multiphase Batch Processes", INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, v. 57, (21), May 2018, p. 7232-7244 (2018)

Hu, Xiaomin; Wang, Limin; Gao, Furong, "Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty", Industrial and Engineering Chemistry Research, v. 57, (51), December 2018, p. 17462-17469 (2018)

Wang, Limin; Wang, Runze; Xiong, Yuting; Wang, Haosen; Zhu, Lin; Zhang, Ke; Gao, Furong, "Guaranteed Cost Iterative Learning Control for Multi-Phase Batch Processes", Journal of Shanghai Jiaotong University (Science), v. 23, (6), December 2018, p. 811-819 (2018)

Liu, Yan; Wang, Fuli; Gao, Furong; Cui, Haonan, "Hierarchical multiblock T-PLS based operating performance assessment for plant-wide processes", Industrial and Engineering Chemistry Research, v.57, (43), October 2018, p. 14617-14627 (2018)

Wang, Limin; Shen, Yiteng; Li, Bingyun; Yu, Jingxian; Zhang, Ridong; Gao, Furong, "Hybrid Iterative Learning Fault-tolerant Guaranteed Cost Control Design for Multi-phase Batch Processes", CANADIAN JOURNAL OF CHEMICAL ENGINEERING, v.96, (2), February 2018, p. 521-530 (2018)

Liu, Yan; Ma, R.; Wang, F.; Chang, Y.; Gao, Furong, "Inner-phase and inter-phase analysis based operating performance assessment and nonoptimal cause identification for multiphase batch processes", Chemical Engineering Research and Design, v. 134, June 2018, p. 292-308 (2018)

Li, Wenqing; Zhao, Chunhui; Gao, Furong, "Linearity Evaluation and Variable Subset Partition Based Hierarchical Process Modeling and Monitoring", IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v. 65, (3), March 2018, article number 8017442, p. 2683-2692 (2018)

Tang, Xiaopeng; Yao, Ke; Liu, Boyang; Hu, Wengui; Gao, Furong, "Long-term battery voltage, power, and surface temperature prediction using a model-based extreme learning machine", Energies, v. 11, (1), Jan 2018, article number 86 (2018)

Luo, L.; Yao, Y.; Gao, Furong; Zhao, C., "Mixed-effects Gaussian Process Modeling Approach With Application in Injection Molding Processes", Journal of Process Control, v. 62, February 2018, p. 37-43 (2018)

Zhu, Jinlin; Yao, Yuan; Li, Dewei; Gao, Furong, "Monitoring big process data of industrial plants with multiple operating modes based on hadoop", Journal of the Taiwan Institute of Chemical Engineers, v. 91, October 2018, p. 10-21 (2018)

Hu, Xiaomin; Zou, Hongbo; Tao, Jili; Gao, Furong, "Multimodel fractional predictive functional control design with application on an industrial heating furnace", Industrial & Engineering Chemistry Research, v. 57, (42), October 2018, p. 14182-14190 (2018)

Lu, Jingyi; Cao, Zhixing; Zhang, Ridong; Gao, Furong, "Nonlinear Monotonically Convergent Iterative Learning Control for Batch Processes", IEEE Transactions on Industrial Electronics, v. 65, (7), July 2018, p. 5826-5836 (2018)

Zhu, Jinlin; Ge, Zhiqiang; Song, Zhihuan; Gao, Furong, "Review and big data perspectives on robust data mining approaches for industrial process modeling with outliers and missing data", Annual Reviews in Control, v. 46, October 2018, p. 107-133 (2018)

Wang, Limin; Shen, Yiteng; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong, "Robust Iterative Learning Control for Multi-phase Batch Processes: An Average Dwell-time Method with 2D Convergence Indexes", International Journal of Systems Science, v.49, (2), January 2018, p. 324-343 (2018)

Zhu, Jinlin; Gao, Furong, "Similar batch process monitoring with orthogonal subspace alignment", IEEE Transactions on Industrial Electronics, v. 65, (10), 2018, p. 8173-8183 (2018)

Zhu, Jinlin; Yao, Yuan; Gao, Furong, "Transfer of Qualitative and Quantitative Knowledge for Similar Batch Process Monitoring", IEEE Access, v. 6, 2018, article number 8555549, p. 73856-73870 (2018)

Zhang, Shumei; Zhao, Chunhui; Gao, Furong, "Two-directional Concurrent Strategy of Mode Identification and Sequential Phase Division for Multimode and Multiphase Batch Process Monitoring with Uneven engths", Chemical Engineering Science, v. 178, Mar 2018, p. 104-117 (2018)

Bo, Cui-mei; Yang, Lei; Huang, Qing-qing; Li, Jun; Gao, Fu Rong, "2D Multi-model General Predictive Iterative Learning Control for Semi-batch Reactor with Multiple Reactions", JOURNAL OF CENTRAL SOUTH UNIVERSITY, v.24, (11), November 2017, p. 2613-2623 (2017)

Zhao, Chunhui; Gao, Furong, "A Sparse Dissimilarity Analysis Algorithm for Incipient Fault Isolation with No Priori Fault Information", Control Engineering Practice, v. 65, August 2017, p. 70-82 (2017)

Wang, Zhuo; Lu, Renquan; Gao, Furong; Liu, Derong, "An Indirect Data-Driven Method for Trajectory Tracking Control of a Class of Nonlinear Discrete-Time Systems", IEEE Transactions on Industrial Electronics, v. 64, (5), May 2017, p.4121-4129 (2017)

Zhang, Ridong; Gao, Furong; Christofides, Panagiotis D., "An improved approach for H-infinity design of linear quadratic tracking control for chemical processes with partial actuator failure", JOURNAL OF PROCESS CONTROL, v. 58, October 2017, p. 63-72 (2017)

Lu, Jingyi; Cao, Zhixing; Gao, Furong, "Batch Process Control-Overview and Outlook", Zidonghua Xuebao/Acta Automatica Sinica, v.43, (6), June 2017, p. 933-943 (2017)

Zhao, Chunhui; Gao, Furong, "Critical-to-Fault-Degradation Variable Analysis and Direction Extraction for Online Fault Prognostic", IEEE Transactions on Control Systems Technology, v. 25, (3), May 2017, p. 842-854 (2017)

Zhang, Ridong; Zou, Qin; Cao, Zhixing; Gao, Furong, "Design of Fractional Order Modeling Based Extended Non-Minimal State Space MPC for Temperature in an Industrial Electric Heating Furnace", Journal of Process Control, v. 56, August 2017, p. 13-22 (2017)

Zou, Qin; Zhang, Junfeng; Zhang, Ridong; Gao, Furong; Xue, Anke, "Fractional Order MPC Design Using Improved State Space Model", IFAC-PapersOnLine, v. 50, (1), July 2017, p. 7535-7540 (2017)

Wang, Limin; Zhu, Chengjie; Yu, Jingxian; Ping, Li; Zhang, Ridong; Gao, Furong, "Fuzzy Iterative Learning Control for Batch Processes with Interval Time-Varying Delays", Industrial & engineering chemistry research, v. 56, (14), April 2017, p. 3993-4001 (2017)

Wu, Sheng; Jin, Qibing; Zhang, Ridong; Zhang, Junfeng; Gao, Furong, "Improved Design of Constrained Model Predictive Tracking Control for Batch Processes Against Unknown Uncertainties", ISA Transactions, v. 69, July 2017, p. 273-280 (2017)

Gao, Ming; Sheng, Li; Zhou, Donghua; Gao, Furong, "Iterative Learning Fault-Tolerant Control for Networked Batch Processes with Multirate Sampling and Quantization Effects", Industrial & Engineering Chemistry Research, v. 56, (9), March 2017, p. 2515-2525 (2017)

Wang, Limin; Liu, Fanfan; Yu, Jingxian; Li, Ping; Zhang, Ridong; Gao, Furong, "Iterative Learning Fault-tolerant Control for Injection Molding Processes Against Actuator Faults", Journal of Process Control, v. 59, November 2017, p. 59-72 (2017)

Wang, L.; Yang, J.; Yu, J.; Li, B.; Gao, Furong, "Iterative learning fault-tolerant control for batch processes based on T-S fuzzy model", Huagong Xuebao/CIESC Journal, v. 68, (3), March 2017, p. 1081-1089 (2017)

Fang, Tao; Zhang, Ridong; Gao, Furong, "LQG Benchmark Based Performance Assessment of IMC-PID Temperature Control System", INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, v.56, (51), December 2017, p. 15102-15111 (2017)

Qin, Yan; Zhao, Chunhui; Zhang, Shumei; Gao, Furong, "Multimode and Multiphase Batch Processes Understanding and Monitoring Based on Between-Mode Similarity Evaluation and Multimode Discriminative Information Analysis", Industrial and Engineering Chemistry Research, v. 56, (34), 30 August 2017, p. 9679-9690 (2017)

Tang, Xiaopeng; Liu, Boyang; Lv, Zhou; Gao, F., "Observer Based Battery SOC Estimation: Using Multi-gain-switching Approach", Applied Energy, v.204, Oct 2017, p. 1275-1283 (2017)

Qin, Y.; Zhao, C.; Wang, X.; Gao, Furong, "Subspace Decomposition and Critical Phase Selection Based Cumulative Quality Analysis for Multiphase Batch Processes", Chemical Engineering Science, v. 166, 2017, p. 130-143 (2017)

Zhang, Ridong; Tao, Jili; Gao, Furong, "A New Approach of Takagi-Sugeno Fuzzy Modeling Using an Improved Genetic Algorithm Optimization for Oxygen Content in a Coke Furnace", Industrial & engineering chemistry research, v. 55, (22), 2016, p. 6465-6474 (2016)

Wang, Zhuo ; Gao, Furong, "Adaptive Output Trajectory Tracking Control for a Class of Affine Nonlinear Discrete-Time Systems", IEEE Transactions on Systems, Man, and Cybernetics: Systems, v. 46, (3), March 2016, p. 326-333 (2016)

Qin, Yan; Zhao, Chunhui; Gao, Furong, "An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring", AIChE journal, v. 62, (7), July 2016, p. 2358-2373 (2016)

Cao, Zhixing; Zhang, Ridong ; Yang, Yi ; Lu, Jingyi; Gao, Furong, "Discrete-Time Robust Iterative Learning Kalman Filtering for Repetitive Processes", IEEE Transactions on Automatic Control, v. 61, (1), January 2016, p. 270-275 (2016)

Lu, Jingyi; Cao, Zhixing; Gao, Furong, "Ellipsoid invariant set-based robust model predictive control for repetitive processes with constraints", IET Control Theory & Applications, v. 10, (9), June 2016, p. 1018-1026 (2016)

Zhao, Chunhui; Gao, Furong, "Fault Subspace Selection Approach Combined With Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis", IEEE Transactions on Control Systems Technology, v. 24, (3), May 2016, Article number 7295568, p. 928-939 (2016)

Yang, Yi ; Cao, Wanlin ; Cao, ZhiKai ; Zhou, Hua ; Gao, Furong; Shi, Jia , "Integrated Design Method of a Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes", Industrial & engineering chemistry research, v. 55, (6), 2016, p. 1598-1608 (2016)

Cao, Zhixing; Lu, Jingyi; Zhang, Ridong; Gao, Furong, "Iterative Learning Kalman Filter for Repetitive Processes", Journal of Process Control, v. 46, October 2016, p. 92-104 (2016)

Zhang, Ridong; Lu, Renquan; Xue, Anke; Gao, Furong, "New Minmax Linear Quadratic Fault-Tolerant Tracking Control for Batch Processes", IEEE Transactions on Automatic Control, v. 61, (10), 2016, article number 7339434, p. 3045-3051 (2016)

Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong, "Online identification for batch processes in closed loop incorporating priori controller knowledge", Computers & chemical engineering, v. 90, July 2016, p. 222-233 (2016)

Zheng, Junhua; Ge, Zhigiang; Song, Zhihuan; Gao, Furong, "Phase adaptive RVM model for quality prediction of multiphase batch processes with limited modeling batches", Chemometrics and intelligent laboratory systems, v. 156, 2016, Aug, p. 81-88 (2016)

Guo, Shuo; Yuan, Decheng; Zhang, Ridong; Gao, Furong, "Prediction of Human Promoter with Least Square Support Vector Machine based on Kernel Locality Preserving Projection", Chemometrics and Intelligent Laboratory Systems, v. 158, November 2016, p. 69-79 (2016)

Zhao, Chunhui; Wang, Wei; Gao, Furong, "Probabilistic Fault Diagnosis Based on Monte Carlo and Nested-Loop Fisher Discriminant Analysis for Industrial Processes", Industrial & Engineering Chemistry Research, v. 55, (50), 2016, Dec, p. 12896-12908 (2016)

Tang, Xiaopeng; Liu, Boyang; Gao, Furong; Lv, Zhou, "State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer", Energies, v. 9, (9), September 2016, article number 675 (2016)

Li, Dewei; Xi, Yugeng; Lu, Jingyi; Gao, Furong, "Synthesis of Real-Time-Feedback-Based 2D Iterative Learning Control Model Predictive Control for Constrained Batch Processes with Unknown Input Nonlinearity", Industrial & Engineering Chemistry Research, v. 55, (51), Dec 2016, p. 13074-13084 (2016)

Li, Dewei; Li, Jiwei; Xi, Yugeng; Gao, Furong, "The robust model predictive control based on mixed H₂/H_∞ approach with separated performance formulations and its ISpS analysis", International Journal of Control, v. 90, (12), December 2017, p. 2721-2733 (2016)

Cao, Zhixing; Zhang, Ridong; Lu, Jingyi; Gao, Furong, "Two-time dimensional recursive system identification incorporating priori pole and zero knowledge", Journal of process control, v. 39, 2016, p. 100-110 (2016)

王立敏; 朱城杰; 于晶賢; 高福榮, "注塑過程中注射保壓階段最小運行時間控制方法", 工程塑料應用=Engineering Plastics Application, v. 44, (4), April 2016, p. 53-56 (2016)

张碧陶, 高福荣, 姚科, "集成神经网络与自适应算法的分数阶滑模控制", Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v. 33, (10), 2016, p. 1373-1377 (2016)

Zhao, Chunhui ; Gao, Furong, "A nested-loop Fisher discriminant analysis algorithm", Chemometrics and intelligent laboratory systems, v. 146, August 2015, p. 396-406 (2015)

Zhang, Ridong; Gao, Furong, "An improved decoupling structure based state space MPC design with improved performance", Systems & control letters, v. 75, January 2015, p. 77-83 (2015)

Yang, Bo ; Xu, Zuhua ; Yang, Yi ; Gao, Furong, "Application of Two-Dimensional Predictive Functional Control in Injection Molding", Industrial and Engineering Chemistry Research, v. 54, (41), 2015, Oct, p. 10088-10102 (2015)

Luo, Linkai; Yao, Yuan ; Gao, Furong, "Bayesian improved model migration methodology for fast process modeling by incorporating prior information", Chemical engineering science, v. 134, 2015, p. 23-35 (2015)

Zhao, Chunhui; Wang, Wei; Qin, Yan; Gao, Furong, "Comprehensive Subspace Decomposition with Analysis of Between-Mode Relative Changes for Multimode Process Monitoring", Industrial and Engineering Chemistry Research, v. 54, (12), April 2015, p. 3154-3166 (2015)

Wang, Li-Min; Yu, Jing-Xian; Shi, Jia; Gao, Furong, "Delay-range dependent H∞control for uncertain 2D-delayed systems", Numerical Algebra, Control and Optimization, v. 5, (1), 2015, p. 11-23 (2015)

Zhang, Ridong; Jin, Qibing ; Gao, Furong, "Design of state space linear quadratic tracking control using GA optimization for batch processes with partial actuator failure", Journal of process control, v. 26, February 2015, p. 102-114 (2015)

Zhang, Ridong; Gao, Furong, "Improved infinite horizon LQ tracking control for injection molding process against partial actuator failures", Computers and Chemical Engineering, v. 80, 2015, Sep, p. 130-139 (2015)

Liu, Haozhi ; Xu, Bugong ; Gao, Furong, "Modeling method of monitoring for batch process based on time series model migration", Control and Decision, v. 30, (1), 2015, Oct, p. 1885-1889 (2015)

Li, Wenqing ; Zhao, Chun-Hui ; Gao, Furong, "Sequential Time Slice Alignment Based Unequal-Length Phase Identification and Modeling for Fault Detection of Irregular Batches", Industrial and Engineering Chemistry Research, v. 54, (41), 2015, Oct, p. 10020-10030 (2015)

Zhao, Luping ; Zhao, Chunhui ; Gao, Furong, "Between-Mode Quality Analysis Based Multimode Batch Process Quality Prediction", Industrial & engineering chemistry research v. 53, (40), October 2014, p. 15629-15638 (2014)

Bo, Cuimei ; Zhang, Ridong ; Zhang, Chenghao ; Tang, Jihai ; Qiao, Xu ; Gao, Furong, "Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems", Chinese Journal of Chemical Engineering v. 22, (7), July 2014, p. 837-841 (2014)

Cao, Z. ; Yang, Y. ; Lu, J. ; Gao, F., "Constrained two dimensional recursive least squares model identification for batch processes", Journal of process control v. 24, (6), 2014, p. 871-879 (2014)

Wu, Sheng ; Zhang, Ridong; Lu, Renquan ; Gao, Furong, "Design of dynamic matrix control based PID for residual oil outlet temperature in a coke furnace", Chemometrics and intelligent laboratory systems, v. 134, 2014, May, p. 110-117 (2014)

Zhang, Ridong ; Zou, Hongbo ; Xue, Anke ; Gao, Furong, "GA based predictive functional control for batch processes under actuator faults", Chemometrics and intelligent laboratory systems v. 137, October 2014, p. 67-73 (2014)

Zhang, R., Wu, S., Gao, F., "Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower", Journal of process control. v. 24, (3), 2014, p. 125-132 (2014)

Zhang, Ridong., Lu, Renquan., Xue, Anke., Gao, Furong., "Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process", Industrial & engineering chemistry research. v. 53, (2), January 2014, p. 723-731 (2014)

Zhang, R. ; Wu, S. ; Lu, R. ; Gao, F., "Predictive control optimization based PID control for temperature in an industrial surfactant reactor", Chemometrics and intelligent laboratory systems v. 135, 2014, p. 48-62 (2014)

Zhang, Ridong ; Xue, Anke ; Lu, Renquan ; Li, Ping ; Gao, Furong, "Real-time implementation of improved state-space MPC for air supply in a coke furnace", IEEE Transactions on Industrial Electronics v. 61, (7), 2014, July , p. 3532-3539 (2014)

Li, D., Gao, F., Xi, Y., "Separated design of robust model predictive control for LPV systems with periodic disturbance", Journal of process control. v. 24, (1), 2014, p. 250-260 (2014)

Zhang, R. ; Lu, J. ; Qu, H. ; Gao, F., "State space model predictive fault-tolerant control for batch processes with partial actuator failure", Journal of process control v. 24, (5), 2014, p. 613-620 (2014)

Zhao, Chunhui ; Gao, Furong, "Statistical modeling and online fault detection for multiphase batch processes with analysis of between-phase relative changes", Chemometrics and Intelligent Laboratory Systems, v. 130, 2014, Jan, p. 58-67 (2014)

Zhang, R.; Xue, A. ; Gao, F., "Temperature control of industrial coke furnace using novel state space model predictive control", IEEE Transactions on Industrial Informatics v. 10, (4), 2014, p. 2084-2092 (2014)

Ge, Z., Song, Z., Zhao, L., Gao, F., "Two-level PLS model for quality prediction of multiphase batch processes", Chemometrics and intelligent laboratory systems. v. 130, 2014, p. 29-36 (2014)

Wang, Limin., Chen, Xi., Gao, Furong., "An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes", Chinese Journal of Chemical Engineering. v. 21, (4), April 2013, p. 401-411 (2013)

Bo, Cuimei., Tang, Jihai., Cui, Mifen., Feng, Kangkang., Qiao, Xu., Gao, Furong., "Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System", Industrial & engineering chemistry research. v. 52, (49), December 2013, p. 17465-17474 (2013)

Wang, Limin., Mo, Shengyong., Zhou, Donghua., Gao, Furong., Chen, Xi., "Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes", Industrial & engineering chemistry research. v. 52, (7), February 2013, p. 2661-2671 (2013)

Wang, Limin., Mo, Shengyong., Zhou, Donghua., Gao, Furong., Chen, Xi., "Delay-range-dependent guaranteed cost control for batch processes with state delay", AIChE journal. v. 59, (6), June 2013, p. 2033-2045 (2013)

Wang, Limin., Mo, Shengyong., Zhou, Donghua., Gao, Furong., Chen, Xi., "Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties", Journal of process control. v. 23, (5), June 2013, p. 715-730 (2013)

Wang, Limin; Mo, Shengyong; Qu, Hongyi ; Zhou, Donghua ; Gao, Furong, "H-infinity design of 2D controller for batch processes with uncertainties and interval time-varying delays", Control engineering practice v. 21, (10), October 2013, p. 1321-1333 (2013)

Wang, L., Mo, S., Qu, H., Zhou, D., Gao, F., "H∞ design of 2D controller for batch processes with uncertainties and interval time-varying delays", Control engineering practice. v. 21, (10), 2013, p. 1321-1333 (2013)

Ge, Zhiqiang., Song, Zhihuan., Gao, Furong., "Incorporating Setting Information for Maintenance-Free Quality Modeling of Batch Processes", AIChE journal. v. 59, (3), March 2013, p. 772-779 (2013)

Ge, Zhiqiang., Song, Zhihuan., Gao, Furong., Wang, Peiliang., "Information-Transfer PLS Model for Quality Prediction in Transition Periods of Batch Processes", Industrial & engineering chemistry research. v. 52, (15), April 2013, p. 5507-5511 (2013)

Zhao, Luping., Zhao, Chunhui., Gao, Furong., "Inner-Phase Analysis Based Statistical Modeling and Online Monitoring for Uneven Multiphase Batch Processes", Industrial & engineering chemistry research. v. 52, (12), March 2013, p. 4586-4596 (2013)

Zhang, Ridong., Gao, Furong., "Multivariable decoupling predictive functional control with non-zero-pole cancellation and state weighting: Application on chamber pressure in a coke furnace", Chemical engineering science. v. 94, May 2013, p. 30-43 (2013)

Zhang, R.; Gan, L.; Lu, J.; Gao, F., "New design of state space linear quadratic fault-tolerant tracking control for batch processes with partial actuator failure", Industrial & engineering chemistry research. v. 52, (46), 2013, p. 16294-16300 (2013)

Xu, Zuhua., Zhao, Jun., Yang, Yi., Shao, Zhijiang., Gao, Furong., "Optimal Iterative Learning Control Based on a Time-Parametrized Linear Time-Varying Model for Batch Processes", Industrial & engineering chemistry research. v. 52, (18), May 2013, p. 6182-6192 (2013)

Ge, Zhiqiang., Song, Zhihuan., Gao, Furong., "Review of Recent Research on Data-Based Process Monitoring", Industrial & engineering chemistry research. v. 52, (10), March 2013, p. 3543-3562 (2013)

Ge, Zhiqiang., Song, Zhihuan., Gao, Furong., "Self-Training Statistical Quality Prediction of Batch Processes with Limited Quality Data", Industrial & engineering chemistry research. v. 52, (2), January 2013, p. 979-984 (2013)

Zhang, Ridong., Gao, Furong., "State Space Model Predictive Control Using Partial Decoupling and Output Weighting for Improved Model/Plant Mismatch Performance", Industrial & engineering chemistry research. v. 52, (2), January 2013, p. 817-829 (2013)

Li, Dewei., Xi, Yugeng., Gao, Furong., "Synthesis of dynamic output feedback RMPC with saturated inputs", Automatica. v. 49, (4), April 2013, p. 949-954 (2013)

Qin, Xusong., Yang, Bin., Gao, Furong., Chen, Guohua., "Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions", Journal of environmental engineering. v. 139, (7), 2013, Jul, p. 1004-1016 (2013)

Shi, J., Jiang, Q.-Y., Cao, Z.-K., Zhou, H., Gao, F.-R., "Two-dimensional model predictive iterative learning control scheme based on a two-dimensional performance model", ACTA AUTOMAT. SINICA. v. 39, (5), 2013, p. 565-573 (2013)

Xie, Lei ; Gao, Furong; Huang, Biao , "4th Symposium on advanced control of industrial processes (Adconip)", Asia-Pacific Journal of Chemical Engineering, v. 7, (5), 2012, Sep, p. 633-634 (2012)

Zhao, Chunhui ; Sun, Youxian ; Gao, Furong, "A multiple-time-region (MTR)-based fault subspace decomposition and reconstruction modeling strategy for online fault diagnosis", Industrial and Engineering Chemistry Research, v. 51, (34), 2012, Aug, p. 11207-11217 (2012)

Zhao, Chunhui., Gao, Furong., "Between-phase-based statistical analysis and modeling for transition monitoring in multiphase batch processes", AIChE journal. v. 58, (9), September 2012, p. 2682-2696 (2012)

Zhao, Chunhui., Li, Wenqing., Sun, Youxian., Gao, Furong., "Multiple Local Reconstruction Model-based Fault Diagnosis for Continuous Processes", Acta Automatica Sinica. v.39, (5), 2013, p. 487-493 (2012)

Yao, Yuan., Dong, Weiwei., Zhao, Luping., Gao, Furong., "Multivariate statistical monitoring of multiphase batch processes with between-phase transitions and uneven operation durations", The Canadian journal of chemical engineering. v. 90, (6), December 2012, p. 1383-1392 (2012)

Ge, Zhiqiang., Song, Zhihuan., Gao, Furong., "Nonlinear quality prediction for multiphase batch processes", AIChE journal. v. 58, (6), June 2012, p. 1778-1787 (2012)

Yang, Y., Yao, K., Gao, F., "Overall Control System for Injection Molding Process", International polymer processing. v. 27, (1), March 2012, p. 40-59 (2012)

Zhang, Ridong., Xue, Anke., Wang, Shuding., Zhang, Jianming., Gao, Furong., "Partially decoupled approach of extended non-minimal state space predictive functional control for MIMO processes", Journal of process control. v. 22, (5), June 2012, p. 837-851 (2012)

Zhao, Luping., Zhao, Chunhui., Gao, Furong., "Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes", Chinese Journal of Chemical Engineering. v. 20, (6), December 2012, p. 1191-1197 (2012)

Dong, Weiwei ; Yao, Yuan; Gao, Furong, "Phase analysis and identification method for multiphase batch processes with partitioning multi-way principal component analysis (MPCA) model", Chinese Journal of Chemical Engineering, v. 20, (6), 2012, Dec, p. 1121-1127 (2012)

Jiang, Zhijun., Yang, Yi., Mo, Shengyong., Yao, Ke., Gao, Furong., "Polymer Extrusion: From Control System Design to Product Quality", Industrial & engineering chemistry research. v. 51, (45), November 2012, p. 14759-14770 (2012)

Wang, Limin., Mo, Shengyong., Zhou, Donghua., Gao, Furong., Chen, Xi., "Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures", Journal of process control. v. 22, (7), August 2012, p. 1273-1286 (2012)

Zhao, C., Gao, F., "Spectra calibration modeling and statistical analysis for cumulative quality interpretation and prediction", AIChE journal. v. 58, (2), 2012, p. 466-479 (2012)

Ge, Zhiqiang., Song, Zhihuan., Gao, Furong., "Statistical Prediction of Product Quality in Batch Processes with Limited Batch-Cycle Data", Industrial & engineering chemistry research. v. 51, (35), September 2012, p. 11409-11416 (2012)

Zhao, Chunhui ; Gao, Furong; Sun, Youxian , "Statistical modeling and online monitoring based on between-set regression analysis", Industrial and Engineering Chemistry Research, v. 51, (25), 2012, June, p. 8495-8509 (2012)

Zhao, C., Gao, F., "Two-step multiset regression analysis (MsRA) algorithm", Industrial & engineering chemistry research. v. 51, (3), 2012, p. 1337-1354 (2012)

Mo, Shengyong., Wang, Limin., Yao, Yuan., Gao, Furong., "Two-time dimensional dynamic matrix control for batch processes with convergence analysis against the 2D interval uncertainty", Journal of process control. v. 22, (5), June 2012, p. 899-914 (2012)

Ge, Zhiqiang., Zhao, Luping., Yao, Yuan., Song, Zhihuan., Gao, Furong., "Utilizing transition information in online quality prediction of multiphase batch processes", Journal of process control. v. 22, (3), 2012, p. 599-611 (2012)

Qin, X., Gao, F., Chen, G., "Wastewater quality monitoring system using sensor fusion and machine learning techniques", Water research. v. 46, (4), 2012, p. 1133-1144 (2012)

Zhao, Chunhui., Gao, Furong., "A Bidirectional Between-Set Statistical Analysis Method and Its Applications", AIChE journal. v. 57, (5), May 2011, p. 1233-1249 (2011)

Zhao, Chunhui., Gao, Furong., Niu, Dapeng., Wang, Fuli., "A two-step basis vector extraction strategy for multiset variable correlation analysis", Chemometrics and intelligent laboratory systems. v. 107, (1), May 2011, p. 147-154 (2011)

Ge, Zhiqiang., Gao, Furong., Song, Zhihuan., "Batch process monitoring based on support vector data description method", Journal of process control. v. 21, (6), July 2011, p. 949-959 (2011)

Yan, Wenjin., Hu, Shuangquan., Yang, Yanhui., Gao, Furong., Chen, Tao., "Bayesian migration of Gaussian process regression for rapid process modeling and optimization", Chemical engineering journal. v. 166, (3), February 2011, p. 1095-1103 (2011)

Liu, T., Gao, F., "Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics", ISA transactions. v. 50, (2), 2011, p. 239-248 (2011)

Zhao, Chunhui., Gao, Furong., Niu, Dapeng., Wang, Fuli., "Enhanced Process Comprehension and Quality Analysis Based on Subspace Separation for Multiphase Batch Processes", AIChE journal. v. 57, (2), February 2011, p. 388-403 (2011)

Ge, Zhiqiang., Gao, Furong., Song, Zhihuan., "Mixture probabilistic PCR model for soft sensing of multimode processes", Chemometrics and intelligent laboratory systems. v. 105, (1), January 2011, p. 91-105 (2011)

Zhao, Chunhui., Gao, Furong., "Multiphase calibration modeling and quality interpretation by priority sorting", Chemical engineering science. v. 66, (21), November 2011, p. 5400-5409 (2011)

Wang, Y., Tuo, J., Zhao, Z., Gao, F., "Optimal structure of learning-type set-point in various set-point-related indirect ilc algorithms", Industrial & engineering chemistry research. v. 50, (23), 2011, p. 13427-13434 (2011)

Kong, Xiangsong., Yang, Yi., Chen, Xi., Shao, Zhijiang., Gao, Furong., "Quality Control via Model-Free Optimization for a Type of Batch Process with a Short Cycle Time and Low Operational Cost", Industrial & engineering chemistry research. v. 50, (5), March 2011, p. 2994-3003 (2011)

Wang, Limin., Mo, Shengyong., Zhou, Donghua., Gao, Furong., "Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays", Journal of process control. v. 21, (7), August 2011, p. 987-996 (2011)

Zhao, Chunhui., Gao, Furong., Wang, Fuli., "Spectra Data Analysis and Calibration Modeling Method Using Spectra Subspace Separation and Multiblock Independent Component Regression Strategy", AIChE journal. v. 57, (5), May 2011, p. 1202-1215 (2011)

Zhao, Chunhui., Mo, Shengyong., Gao, Furong., Lu, Ningyun., Yao, Yuan., "Statistical analysis and online monitoring for handling multiphase batch processes with varying durations", Journal of process control. v. 21, (6), July 2011, p. 817-829 (2011)

Ge, Zhiqiang., Gao, Furong., Song, Zhihuan., "Two-dimensional Bayesian monitoring method for nonlinear multimode processes", Chemical engineering science. v. 66, (21), November 2011, p. 5173-5183 (2011)

Zhao, Chunhui., Gao, Furong., Yao, Yuan., Wang, Fuli., "A Robust Calibration Modeling Strategy for Analysis of Interference-Subject Spectral Data", AIChE journal. v. 56, (1), 2010, JAN, p. 196-206 (2010)

Liu, Tao., Gao, Furong., "A frequency domain step response identification method for continuous-time processes with time delay", Journal of process control. v. 20, (7), 2010, AUG, p. 800-809 (2010)

Zhao, Chunhui., Gao, Furong., Wang, Fuli., "An Improved Independent Component Regression Modeling and Quantitative Calibration Procedure", AIChE journal. v. 56, (6), 2010, JUN, p. 1519-1535 (2010)

Chen, Xi., Zhang, Lei., Kong, Xiangsong., Lu, Junde., Gao, Furong., "Automatic Velocity Profile Determination for Uniform Filling in Injection Molding", Polymer engineering and science. v. 50, (7), 2010, JUL, p. 1358-1371 (2010)

Liu, Tao., Gao, Furong., "Closed-loop step response identification of integrating and unstable processes", Chemical engineering science. v. 65, (10), 2010, MAY 15, p. 2884-2895 (2010)

Qin, Xusong., Gao, Furong., Chen, Guohua., "Effects of the geometry and operating temperature on the stability of Ti/IrO2-SnO2-Sb2O5 electrodes for O-2 evolution", Journal of Applied Electrochemistry. v. 40, (10), 2010, OCT, p. 1797-1805 (2010)

Liu, Tao., Gao, Furong., Wang, Youqing., "IMC-based iterative learning control for batch processes with uncertain time delay", Journal of process control. v. 20, (1), 2010, JAN, p. 173-180 (2010)

Xue, Yali., Li, Donghai., Gao, Furong., "Multi-objective optimization and selection for the PI control of ALSTOM gasifier problem", Control engineering practice. v. 18, (1), 2010, JAN, p. 67-76 (2010)

Zhao, Chunhui., Gao, Furong., "Multiblock-Based Qualitative and Quantitative Spectral Calibration Analysis", Industrial & engineering chemistry research. v. 49, (18), 2010, SEP 15, p. 8694-8704 (2010)

Yao, Y., Chen, T., Gao, F., "Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information", Journal of Process Control. v. 20, (10), 2010, p. 1188-1197 (2010)

Liu, T., Gao, F., "New insight into internal model control filter design for load disturbance rejection", IET CONTROL THEORY AND APPLICATIONS. v. 4, (3), 2010, MAR, p. 448-460 (2010)

Zhao, Chunhui., Gao, Furong., Wang, Fuli., "Phase-Based Joint Modeling and Spectroscopy Analysis for Batch Processes Monitoring", Industrial & engineering chemistry research. v. 49, (2), 2010, JAN 20, p. 669-681 (2010)

Zhao, C.-H., Wang, F.-L., Yao, Y., Gao, F.-R., "Phase-based statistical modeling, online monitoring and quality prediction for batch processes", Zidonghua Xuebao/ Acta Automatica Sinica. v. 36, (3), 2010, p. 366-374 (2010)

Liu, T., Gao, F., "Robust two-dimensional iterative learning control for batch processes with state delay and time-varying uncertainties", Chemical Engineering Science. v. 65, (23), 2010, p. 6134-6144 (2010)

Yao, Yuan., Gao, Furong., "Statistical Monitoring and Fault Diagnosis of Batch Processes Using Two-Dimensional Dynamic Information", Industrial & engineering chemistry research. v. 49, (20), 2010, OCT 20, p. 9961-9969 (2010)

Zhao, Chunhui., Yao, Yuan., Gao, Furong., Wang, Fuli., "Statistical analysis and online monitoring for multimode processes with between-mode transitions", Chemical engineering science. v. 65, (22), 2010, NOV 15, p. 5961-5975 (2010)

Liu, T., Zhou, F., Yang, Y., Gao, F., "Step response identification under inherent-type load disturbance with application to injection molding", Industrial and Engineering Chemistry Research. v. 49, (22), 2010, p. 11572-11581 (2010)

Liu, Tao., Gao, Furong., "A generalized relay identification method for time delay and non-minimum phase processes", Automatica. v. 45, (4), 2009, APR, p. 1072-1079 (2009)

Yao, Yuan., Gao, Furong., "A survey on multistage/multiphase statistical modeling methods for batch processes", Annual reviews in control. v. 33, (2), 2009, DEC, p. 172-183 (2009)

Yao, Yuan., Zhao, Chunhui., Gao, Furong., "Batch-to-Batch Steady State Identification Based on Variable Correlation and Mahalanobis Distance", Industrial & engineering chemistry research. v. 48, (24), 2009, DEC 16, p. 11060-11070 (2009)

Zhao, Chunhui., Wang, Fuli., Gao, Furong., "Covariance-oriented qualitative and quantitative analysis in multivariate calibration for multistage batch processes", Canadian Journal of Chemical Engineering. v.87, (3), 2009, Jun, p. 466-476 (2009)

Wang, Youqing., Zhou, Donghua., Gao, Furong., "Generalized predictive control of linear systems with actuator arrearage faults", Journal of process control. v. 19, (5), 2009, MAY, p. 803-815 (2009)

Liu, Tao., Yao, Ke., Gao, Furong., "Identification and Autotuning of Temperature-Control System With Application to Injection Molding", IEEE transactions on control systems technology. v. 17, (6), 2009, NOV, p. 1282-1294 (2009)

Zhao, Chunhui., Wang, Fuh., Gao, Furong., "Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction", Chemometrics and intelligent laboratory systems. v. 95, (2), 2009, FEB 15, p. 107-121 (2009)

Zhou, F., Yao, K., Chen, X., Gao, F., "In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding", International polymer processing. v. 24, (3), 2009, JUL, p. 253-260 (2009)

Lu, Junde., Yao, Yuan., Gao, Furong., "Model Migration for Development of a New Process Model", Industrial & engineering chemistry research. v. 48, (21), 2009, NOV 4, p. 9603-9610 (2009)

Yao, Yuan., Gao, Furong., "Multivariate statistical monitoring of multiphase two-dimensional dynamic batch processes", Journal of process control. v. 19, (10), 2009, DEC, p. 1716-1724 (2009)

Zhao, Chunhui., Gao, Furong., Wang, Fuli., "Nonlinear Batch Process Monitoring Using Phase-Based Kernel-Independent Component Analysis-Principal Component Analysis (KICA-PCA)", Industrial & engineering chemistry research. v. 48, (20), 2009, OCT 21, p. 9163-9174 (2009)

Yao, Yuan., Gao, Furong., "Phase and transition based batch process modeling and online monitoring", Journal of process control. v. 19, (5), 2009, MAY, p. 816-826 (2009)

Lu, Junde., Yao, Ke., Gao, Furong., "Process Similarity and Developing New Process Models Through Migration", AIChE journal. v. 55, (9), 2009, SEP, p. 2318-2328 (2009)

Wang, Youqing., Gao, Furong., Doyle, III, Francis J., "Survey on iterative learning control, repetitive control, and run-to-run control", Journal of process control. v. 19, (10), 2009, DEC, p. 1589-1600 (2009)

Yao, Yuan., Diao, Yinghu., Lu, Ningyun., Lu, Junde., Gao, Furong., "Two-Dimensional Dynamic Principal Component Analysis with Autodetermined Support Region", Industrial & engineering chemistry research. v. 48, (2), 2009, JAN 21, p. 837-843 (2009)

Liu, Tao., Gao, Furong., Wang, Youqing., "A systematic approach for on-line identification of second-order process model from relay feedback test", AIChE journal. v. 54, (6), 2008, JUN, p. 1560-1578 (2008)

Liu, Tao., Gao, Furong., "Alternative identification algorithms for obtaining a first-order stable/unstable process model from a single relay feedback test", Industrial & engineering chemistry research. v. 47, (4), 2008, FEB 20, p. 1140-1149 (2008)

Yao, Ke., Gao, Furong., Allgoewer, Frank., "Barrel temperature control during operation transition in injection molding", Control engineering practice. v. 16, (11), 2008, NOV, p. 1259-1264 (2008)

Wong, Ho Yin., Fung, Ka Tsai., Gao, Furong., "Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding", Sensors and Actuators a-physical. v. 141, (2), 2008, FEB 15, p. 712-722 (2008)

Zhao, Chunhui., Wang, Fuli., Gao, Furong., Zhang, Yingwei., "Enhanced Process Comprehension and Statistical Analysis for Slow-Varying Batch Processes", Industrial & engineering chemistry research. v. 47, (24), 2008, DEC 17, p. 9996-10008 (2008)

Liu, Tao., Gao, Furong., "Identification of integrating and unstable processes from relay feedback", Computers & chemical engineering. v. 32, (12), 2008, DEC 22, p. 3038-3056 (2008)

Yang, Yi., Yao, Ke., Gao, Furong., "Injection Molding Control: From Single Cycle to Batch Control", Advances in polymer technology. v. 27, (4), 2008, WIN, p. 217-223 (2008)

Wang, Youqing., Zhou, Donghua., Gao, Furong., "Iterative learning model predictive control for multi-phase batch processes", Journal of process control. v. 18, (6), 2008, JUL, p. 543-557 (2008)

Wang, Youqing., Zhou, Donghua., Gao, Furong., "Iterative learning reliable control of batch processes with sensor faults", Chemical engineering science. v. 63, (4), 2008, FEB, p. 1039-1051 (2008)

Lu, Junde., Gao, Furong., "Model Migration with Inclusive Similarity for Development of a New Process Model", Industrial & engineering chemistry research. v. 47, (23), 2008, DEC 3, p. 9508-9516 (2008)

Lu, Junde., Gao, Furong., "Process Modeling based on process similarity", Industrial & engineering chemistry research. v. 47, (6), 2008, MAR 19, p. 1967-1974 (2008)

Liu, Tao., Gao, Furong., "Robust Step-Like Identification of Low-Order Process Model Under Nonzero Initial Conditions and Disturbance", IEEE transactions on automatic control. v. 53, (11), 2008, DEC, p. 2690-2695 (2008)

Yao, Yuan., Gao, Furong., "Subspace identification for two-dimensional dynamic batch process statistical monitoring", Chemical engineering science. v. 63, (13), 2008, JUL, p. 3411-3418 (2008)

Wang, Youqing., Jiang, Canghua., Zhou, Donghua., Gao, Furong., "Variable structure control for a class of nonlinear systems with mismatched uncertainties", Applied mathematics and computation. v. 200, (1), 2008, JUN 15, p. 387-400 (2008)

Wang, Youqing., Yang, Yi., Zhou, Donghua., Gao, Furong., "Active fault-tolerant control of nonlinear batch processes with sensor faults", Industrial & engineering chemistry research. v. 46, (26), 2007, DEC 19, p. 9158-9169 (2007)

Zhao, C., Wang, F., Gao, F., Lu, N., Jia, M., "Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data", Industrial and Engineering Chemistry Research. v. 46, (14), 2007, p. 4943-4953 (2007)

Liu, Tao., Zhang, Weidong., Gao, Furong., "Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays", Journal of process control. v. 17, (2), 2007, FEB, p. 173-188 (2007)

Liu, Tao., Zhang, Weidong., Gao, Furong., "Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input-multiple-output (MIMO) processes with time delays", Industrial & engineering chemistry research. v. 46, (20), 2007, SEP 26, p. 6546-6557 (2007)

Fung, Ka Tsai., Gao, Furong., Chen, Xi., "Application of a capacitive transducer for online part weight prediction and fault detection in injection molding", Polymer engineering and science. v. 47, (4), 2007, APR, p. 347-353 (2007)

Yao, Yuan., Gao, Furong., "Batch process monitoring in score space of two-dimensional dynamic principal component analysis (PCA)", Industrial & engineering chemistry research. v. 46, (24), 2007, NOV 21, p. 8033-8043 (2007)

Yao, Ke., Gao, Furong., "Optimal start-up control of injection molding barrel temperature", Polymer engineering and science. v. 47, (3), 2007, MAR, p. 254-261 (2007)

Li, Donghai., Gao, Furong., Xue, Yali., Lu, Chongde., "Optimization of decentralized PI/PID controllers based on genetic algorithm", Asian journal of control. v. 9, (3), 2007, SEP, p. 306-316 (2007)

Wang, Youqing., Zhou, Donghua., Gao, Furong., "Robust fault-tolerant control of a class of non-minimum phase nonlinear processes", Journal of process control. v. 17, (6), 2007, JUL, p. 523-537 (2007)

Shi, Jia., Gao, Furong., Wu, Tie-Jun., "Single-cycle and multi-cycle generalized 2D model predictive iterative learning control (2D-GPILC) schemes for batch processes", Journal of process control. v. 17, (9), 2007, OCT, p. 715-727 (2007)

Jin, Zhiming., Gao, Furong., "新型注塑螺杆性能研究", 塑料工業, v.35, (6), 2007, p. 23-25 (2007)

Shi, Jia., Gao, Furong., Wu, Tie-Jun., "From two-dimensional linear quadratic optimal control to iterative learning control. Paper 1. Two-dimensional linear quadratic optimal controls and system analysis", Industrial & engineering chemistry research. v. 45, (13), 2006, JUN 21, p. 4603-4616 (2006)

Shi, J., Gao, FR., Wu, TJ., "From two-dimensional linear quadratic optimal control to iterative learning control. Paper 2. Iterative learning controls for batch processes", Industrial & engineering chemistry research. v. 45, (13), 2006, JUN 21, p. 4617-4628 (2006)

Yang, Y., Gao, FR., "Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model", Polymer engineering and science. v. 46, (4), 2006, APR, p. 540-548 (2006)

Wang, Youqing., Shi, Jia., Zhou, Donghua., Gao, Furong., "Iterative learning fault-tolerant control for batch processes", Industrial & engineering chemistry research. v. 45, (26), 2006, DEC 20, p. 9050-9060 (2006)

Wang, Haiqing., Li, Ping., Gao, Furong., Song, Zhihuan., Ding, Steven X., "Kernel classifier with adaptive structure and fixed memory for process diagnosis", AIChE journal. v. 52, (10), 2006, OCT, p. 3515-3531 (2006)

Chen, X., Gao, FR., "Profiling of injection velocity for uniform mold filling", Advances in polymer technology. v. 25, (1), 2006, SPR, p. 13-21 (2006)

Jiang, Canghua., Zhou, Donghua., Gao, Furong., "Robust fault detection and isolation for uncertain linear retarded systems", Asian journal of control. v. 8, (2), 2006, JUN, p. 141-152 (2006)

Shi, Jia., Gao, Furong., Wu, Tie-Jun., "Robust iterative learning control design for batch processes with uncertain perturbations and initialization", AIChE journal. v. 52, (6), 2006, JUN, p. 2171-2187 (2006)

Lu, NY., Gao, FR., "Stage-based online quality control for batch processes", Industrial & engineering chemistry research. v. 45, (7), 2006, MAR 29, p. 2272-2280 (2006)

Lu, N.-Y., Wang, F.-L., Gao, F.-R., Wang, S., "Statistical modeling and online monitoring for batch processes", Zidonghua Xuebao/Acta Automatica Sinica. v. 32, (3), 2006, p. 400-410 (2006)

陆宁云, 王福利, 高福荣, 王姝, "间歇过程的统计建模与在线监测", 自动化学报, v. 32, (3), May 2006, p. 400-410 (2006)

Chen, XM., Gao, FR., Chen, GH., "Comparison of Ti/BDD and Ti/SnO2-Sb2O5 electrodes for pollutant oxidation", Journal of Applied Electrochemistry. v. 35, (2), 2005, FEB, p. 185-191 (2005)

Wang, W., Chen, GH., Gao, FR., "Effect of dielectric material on microwave freeze drying of skim milk", Drying technology. v. 23, (1-2), 2005, p. 317-340 (2005)

Shi, Jia., Gao, Furong., Wu, Tie-jun., "Integrated Design of a Class of Combination Iterative Learning Control Schemes", Ind. Eng. Chem. Res.. v. 44, 2005, p. 8095-8105 (2005)

Shi, J., Gao, FR., Wu, TJ., "Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model", Industrial & engineering chemistry research. v. 44, (21), 2005, OCT 12, p. 8095-8105 (2005)

Chen, X., Gao, F., "On-line detection of the gate freezing-off time for injection molding", Polymer engineering and science. v. 45, (1), 2005, JAN, p. 33-41 (2005)

Shi, J., Gao, FR., Wu, TJ., "Robust design of integrated feedback and iterative learning control of a batch process based on a 2D Roesser system", Journal of process control. v. 15, (8), 2005, DEC, p. 907-924 (2005)

Lu, NY., Gao, FR., "Stage-based process analysis and quality prediction for batch processes", Industrial & engineering chemistry research. v. 44, (10), 2005, MAY 11, p. 3547-3555 (2005)

Lu, NY., Yao, Y., Gao, FR., Wang, FL., "Two-dimensional dynamic PCA for batch process monitoring", AIChE journal. v. 51, (12), 2005, DEC, p. 3300-3304 (2005)

Lu, Ningyun., Yao, Yuan., Wang, Fuli., Gao, Furong., "Two-dimensional dynamic principal component analysis (2D-DPCA) for batch process monitoring", AIChE Journal. v. 51, (12), 2005, p. 3300-3304 (2005)

Guo, X.-P., Lu, N.-Y., Gao, F.-R., Wang, F.-L., "间歇过程æ»'动窗口子时段PCA建模å'Œåœ¨çº¿ç›'测", 控制与决策. v. 20, (9), 2005, p. 1034-1037 (2005)

Chen, X., Gao, FR., Chen, GH., "A soft-sensor development for melt-flow-length measurement during injection mold filling", Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING. v. 384, (1-2), 2004, OCT 25, p. 245-254 (2004)

Jin, ZM., Gao, FR., Zhu, FH., "An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding", Polymer engineering and science. v. 44, (7), 2004, JUL, p. 1313-1318 (2004)

Chen, X., Chen, GH., Gao, FR., "Capacitive transducer for in-mold monitoring of injection molding", Polymer engineering and science. v. 44, (8), 2004, AUG, p. 1571-1578 (2004)

Lu, Ningyun., Yang, Yi., Gao, Furong., Wang, Fuli., "Multirate dynamic inferential modeling for multivariable processes", Chemical engineering science. v. 59, (4), 2004, MAR, p. 855-864 (2004)

Lu, N., Gao, F., Yang, Y., Wang, F., "PCA-based modeling and on-line monitoring strategy for uneven-length batch processes", Industrial & engineering chemistry research. v. 43, (13), 2004, JUN 23, p. 3343-3352 (2004)

Lu, NY., Gao, FR., Wang, FL., "Sub-PCA modeling and on-line monitoring strategy for batch processes", AIChE journal. v. 50, (1), 2004, JAN, p. 255-259 (2004)

Chen, X., Gao, F., "A study of packing profile on injection molded part quality", Materials science and engineering a-structural Materials PROPERTIES Microstructure and PROCESSING. v. 358, (1-2), 2003, OCT 15, p. 205-213 (2003)

Lu, NY., Wang, FL., Gao, FR., "Combination method of principal component and wavelet analysis for multivariate process monitoring and fault diagnosis", Industrial & engineering chemistry research. v. 42, (18), 2003, SEP 3, p. 4198-4207 (2003)

Chen, XM., Chen, GH., Gao, FR., Yue, PL., "High-performance Ti/BDD electrodes for pollutant oxidation", Environmental science & technology. v. 37, (21), 2003, NOV 1, p. 5021-5026 (2003)

金志明, 朱复华, 高福荣, "塑料注射成型熔融过程中的固相破碎现象", 中国塑料, v. 17, (2), 2003, p. 94-97 (2003)

Shao, C., Gao, F.-R., Yang, Y., "最优迭代学习控制的鲁棒稳定性及其在注塑机控制中的应有 Robust stability of optimal iterative learning control and application to injection molding machine", 自动化学报, v. 29, (1), 2003, p. 72-79 (2003)

金志明, 朱复华, 高福荣, "注射成型中的熔体温度均匀性研究", 中国塑料, v. 17, (3), 2003, p. 88-91 (2003)

金志明, 朱复华, 高福荣, "注射成型塑化过程的可视化研究", 中国塑料, v. 17, (4), 2003, p. 6-90 (2003)

Gao, Furong., Hou, Chunhai., "Bound estimation for solutions of a class of delay differential inequalities", NONLINEAR analysis-theory METHODS & APPLICATIONS. v. 49, (4), 2002, MAY, p. 525-533 (2002)

Yu, L., Gao, F., "Output feedback guaranteed cost control for uncertain discrete-time systems using linear matrix inequalities", Journal of optimization theory and applications. v. 113, (3), 2002, JUN, p. 621-634 (2002)

Chan, HS., Leng, Y., Gao, F., "Processing of PC/LCP in situ composites by closed-loop injection molding", Composites science and technology. v. 62, (6), 2002, p. 757-765 (2002)

陈曦, 高福荣, 钱积新, "基于质量的注塑过程建模方法研究：最优保压压力曲线的设定", 中国塑料, v. 16, (51), 2002 (2002)

陈曦, 钱积新, 高福荣, "注塑过程熔体充填长度的动态神经网络软测量模型", 化工自动化及仪表, v. 29, (2), 2002, p.43-46 (2002)

Tian, Y.-C., Gao, Furong., "Analysis and Implementation of the Double-Controller Scheme", Developments in Chemical Engineering and Mineral Processing. v. 9, (1-2), 2001, p. 57-68 (2001)

Li, MZ., Yang, Y., Gao, FR., Wang, FL., "Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding", CANADIAN JOURNAL OF CHEMICAL ENGINEERING. v. 79, (2), 2001, APR, p. 263-272 (2001)

Hou, CH., Gao, FR., "H-infinity and (H)over-bar(infinity) control of retarded systems: a Razumikhin-type approach", International Journal of Systems Science. v. 32, (7), 2001, JUL, p. 905-913 (2001)

Li, MZ., Wang, FL., Gao, FR., "Identification and control of nonlinear processes in the presence of unmeasured load disturbances", Industrial & engineering chemistry research. v. 40, (10), 2001, MAY 16, p. 2275-2282 (2001)

Li, Yu., Gao, Furong., "Optimal guaranteed cost control of discrete-time uncertain systems with both state and input delays", Journal of the Franklin Institute. v. 338, (1), 2001, p. 101-110 (2001)

Li, MZ., Wang, FL., Gao, FR., "PID-based sliding mode controller for nonlinear processes", Industrial & engineering chemistry research. v. 40, (12), 2001, JUN 13, p. 2660-2667 (2001)

Gao, FR., Yang, Y., Shao, C., "Robust iterative learning control with applications to injection molding process", Chemical engineering science. v. 56, (24), 2001, DEC, p. 7025-7034 (2001)

Yang, Y., Gao, FR., "Strategies for injection filling velocity control", Journal of reinforced plastics and composites. v. 20, (13), 2001, p. 1160-1170 (2001)

Gao, FR., Wang, FL., Li, MZ., "A simple nonlinear controller with diagonal recurrent neural network", Chemical engineering science. v. 55, (7), 2000, APR, p. 1283-1288 (2000)

Gao, FR., Jin, ZM., Chen, X., "A visual barrel system for study of reciprocating screw injection molding", Polymer engineering and science. v. 40, (6), 2000, JUN, p. 1334-1343 (2000)

Yang, Y., Gao, FR., "Adaptive control of the filling velocity of thermoplastics injection molding", Control engineering practice. v. 8, (11), 2000, NOV, p. 1285-1296 (2000)

Gao, FR., Wang, FL., Li, MZ., "An analytical predictive control law for a class of nonlinear processes", Industrial & engineering chemistry research. v. 39, (6), 2000, JUN, p. 2029-2034 (2000)

Hou, CH., Gao, FR., Qian, JX., "Improved delay time estimation of RC ladder networks", IEEE TRANSACTIONS on Circuits and SYSTEMS i-fundamental THEORY and APPLICATIONS. v. 47, (2), 2000, FEB, p. 242-246 (2000)

Tian, Yuchu., Hou, Chunhai., Gao, Furong., "Mathematical Modeling of a Continuous Galvanizing Annealing Furnace", Developments in Chem Eng & Mineral Processing. v. 8, (3/4), 2000, p.359-374 (2000)

Wang, BG., Gao, FR., Yue, PL., "Neural network approach to predict melt temperature in injection molding processes", Chinese Journal of Chemical Engineering. v. 8, (4), 2000, DEC, p. 326-331 (2000)

Gao, F., Wang, FL., Li, MZ., "Neural network-based optimal iterative controller for nonlinear processes", CANADIAN JOURNAL OF CHEMICAL ENGINEERING. v. 78, (2), 2000, APR, p. 363-370 (2000)

Gao, FR., Wang, FL., Li, MZ., "Predictive control for processes with input dynamic nonlinearity", Chemical engineering science. v. 55, (19), 2000, OCT, p. 4045-4052 (2000)

Gao, FR., Wang, FL., Li, MZ., "A neural-network-based nonlinear controller using an extended Kalman filter", Industrial & engineering chemistry research. v. 38, (6), 1999, JUN, p. 2345-2349 (1999)

Tsoi, HP., Gao, FR., "Control of injection velocity using a fuzzy logic rule-based controller for thermoplastics injection molding", Polymer engineering and science. v. 39, (1), 1999, JAN, p. 3-17 (1999)

Tian, YC., Gao, FR., "Control of integrator processes with dominant time delay", Industrial & engineering chemistry research. v. 38, (8), 1999, AUG, p. 2979-2983 (1999)

Hou, CH., Gao, FR., "Criteria for Quantitative Stability for a Class of Razumikhin-type Retarded Functional Differential Equations", Journal of Mathematical Analysis and Applications. v. 238, (2), 1999, OCT 15, p. 558-566 (1999)

Yang, Y., Gao, FR., "Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding", Polymer engineering and science. v. 39, (10), 1999, OCT, p. 2042-2063 (1999)

Chao, SM., Wang, SM., Chen, SC., Gao, FR., "Evaluation of gas pressure dynamics for gas-assisted injection molding process", International communications in heat and mass transfer. v. 26, (1), 1999, JAN, p. 85-93 (1999)

Gao, FR., Li, MZ., Wang, FL., Wang, BG., Yue, PL., "Genetic algorithms and evolutionary programming hybrid strategy for structure and weight learning for multilayer feedforward neural networks", Industrial & engineering chemistry research. v. 38, (11), 1999, NOV, p. 4330-4336 (1999)

Tian, YC., Gao, FR., "Injection velocity control of thermoplastic injection molding via a double controller scheme", Industrial & engineering chemistry research. v. 38, (9), 1999, SEP, p. 3396-3406 (1999)

Gao, F.,-., Yang, Y., "Injection velocity control using a self-tuning adaptive controller", International Polymer Processing. v. 14, (2), 1999, Jun, p. 196-204 (1999)

Zhao, CH., Gao, FR., "Melt temperature profile prediction for thermoplastic injection molding", Polymer engineering and science. v. 39, (9), 1999, SEP, p. 1787-1801 (1999)

Hou, CH., Gao, FR., Qian, JX., "Stability Criterion for Linear Systems with Nonlinear Delayed Perturbations", Journal of Mathematical Analysis and Applications. v. 237, (2), 1999, SEP 15, p. 573-582 (1999)

Tian, YC., Gao, FR., "Adaptive control of chaotic continuous-time systems with delay", PHYSICA d-nonlinear PHENOMENA. v. 117, (1-4), 1998, JUN 15, p. 1-12 (1998)

Yang, Y., Gao, FR., "Adaptive control of nozzle melt packing pressure", Journal of intelligent material systems and structures. v. 9, (12), 1998, DEC, p. 1046-1050 (1998)

Tian, YC., Gao, FR., "Compensation of dominant and variable delay in process systems", Industrial & engineering chemistry research. v. 37, (3), 1998, MAR, p. 982-986 (1998)

Tian, YC., Gao, F., "Double-controller scheme for control of processes with dominant delay", IEE proceedings-control THEORY and APPLICATIONS. v. 145, (5), 1998, SEP, p. 479-484 (1998)

Tian, YC., Gao, FR., "Double-controller scheme for separating load rejection from set-point tracking", CHEMICAL ENGINEERING RESEARCH & DESIGN. v. 76, (A4), 1998, MAY, p. 445-450 (1998)

Tian, YC., Gao, FR., "Extraction of delay information from chaotic time series based on information entropy", PHYSICA D. v. 108, (1-2), 1997, SEP 15, p. 113-118 (1997)

Gao, Furong; Patterson, Wayne Ian ; Kamal, Musa R. , "Cavity pressure control during the cooling stage in thermoplastic injection molding", Polymer engineering and science, v. 36, (19), 1996, OCT, p. 2467-2476 (1996)

Book

王友清, 周东华, 高福荣, "迭代学习控制的二维模型理论及其应用", 迭代学习控制的二维模型理论及其应用 / 王友清，周东华，高福荣. 北京: 科学出版社, 2013 (2013)

Liu, Tao., Gao, Furong., "Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods", Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods. / Tao Liu, Furong Gao. London; New York : Springer, c2012 (2012)

Liu, Tao., Gao, Furong., "Advanced Process Identification and Control", Advanced Process Identification and Control. / Springer, 2010, 13 chapters (2010)

Allgower, Frank., Gao, Furong., "7th International Symposium on Advanced Control of Chemical Processes", Pre-prints of 7th International Symposium on Advanced Control of Chemical Processes. v. 1&2, January 11-14 2004 (2004)

Allgower, Frank., Gao, Furong., "Advanced Control of Chemical Processes", Advanced Control of Chemical Processes. v. 1&2, 2004 (2004)

Allgower, Frank., Gao, Furong., "Pre-prints of 7th International Symposium on Adavanced Control of Chemical Processes", International Federation of Automatic Control. Hong Kong, 11-14 January (2004)

Gao, Furong., "Intelligent Control of Injection Molding Process, a completion report submitted to Moog Japan Ltd.", Intelligent Control of Injection Molding Process. June 2002 (2002)

Gao, Furong., "Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding, A final Report to Moog Japan Ltd.", Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding. May 1998 (1998)

Book chapter

Yang, Yi., Gao, Furong., "Direct Quality Control", Computer Modeling for Injection Molding: Simulation, Optimization, and Control. / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 377-390 (2012)

Yang, Yi., Gao, Furong., "Feedback Control", Computer Modeling for Injection Molding: Simulation, Optimization, and Control. / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 313-337 (2012)

Yang, Yi., Gao, Furong., "Learning Control", Computer Modeling for Injection Molding: Simulation, Optimization, and Control. / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 339-353 (2012)

Yao, Yuan., Gao, Furong., "Multivariate Statistical Process Control", Computer Modeling for Injection Molding: Simulation, Optimization, and Control. / Edited by Huamin Zhou. Hoboken, N.J. : Wiley, cop, 2013, p. 335-376 (2012)

Gao, Furong., Yang, Yi., "Injection Molding Control", Injection molding: technology and fundamentals. / Edited by Musa R. Kamal, AvramI. Isayev, Shih-Jung Liu. Munich : Hanser, 2009, p. 0-926 (2009)

Gao, Furong., "塑料成型过程控制", 《工业过程控制技术》应用篇 / 2005, Chapter 5, p. 131-180 (2005)

Wang, Fuli., Gao, Furong., Li, Mingzhong., "A control strategy for process with output dynamic nonlinearity", Recent Developments in optimization and optimal control in chemical engineering, Research Signpost. 115-127 (2002)

Gao, Furong., Yi, Yang., "Injection Molding Control", Injection Molding: Fundamentals and Application. Edited by M. R. Kamal. 1997, Chapter 12, p. 451-502 (1997)

Conference paper

Shi, Jia., Yang, Yi., Gao, Furong., "A PID-type Model Predictive Iterative Learning Control for Injection Molding Process", Society of Plastics Engineers, Annual Technical Conference, ANTEC 2013, Cincinnati, Ohio, USA. April 21-24 2013, p. 2229-2234 (2013)

Zhao, Luping., Zhao, Chunhui., Gao, Furong., "Inner-phase-evolution-traced statistical modeling and online monitoring for uneven batch processes", IEEE International Conference on Control and Automation. 2013, p. 294-299 (2013)

Cao, Zhixin., Yang, Yi., Gao, Furong., "New Approaches of 2D Recursive Least Squares System Identification", Society of Plastics Engineers, Annual Technical Conference, ANTEC 2013, Cincinnati, Ohio, USA. April 21-24 2013, p. 2223-2228 (2013)

Yang, Yi., Gao, Furong., "Application of Advanced Control Algorithms in Injection Molding", The 28th International Conference of the Polymer Processing Society (PPS-28), Pattaya, Thailand. 11-15 December, 2012 (2012)

Yang, Y., Mo, S., Gao, F., "Batch process control, from traditional approaches to 2D control", International Conference on Control, Automation and Systems. 2012, p. 529-532 (2012)

Zhao, Chunhui., Sun, Youxian., Gao, Furong., "Between-phase transition analysis for phase-based quality prediction", 2012 24th Chinese Control and Decision Conference (CCDC), Taiyuan, China. 23-25 May 2012 (2012)

Yang, Y., Shi, J., Gao, F., "Injection velocity control using 2D model predictive iterative learning algorithm", Annual Technical Conference - ANTEC, Conference Proceedings. v. 3, 2012, p. 2155-2160 (2012)

Yang, Yi., Gao, Furong., "Intelligent Injection Molding Control System With Multivariate Statistical Quality Monitoring", 2012 SAMT International Conference. Hangzhou, 22-24 August, 2012 (2012)

Jiang, Z., Yan, Y., Gao, F., "Polymer extrusion control system design", Annual Technical Conference - ANTEC, Conference Proceedings. v. 3, 2012, p. 2187-2196 (2012)

Xu, Z., Zhao, J., Yang, Y., Shao, Z., Gao, F., "Robust iterative learning control with quadratic performance index", Industrial & engineering chemistry research. v. 51, (2), 2012, p. 872-881 (2012)

Zhou, F., Yang, Y., Gao, F., "GPC control of hot-runner temperature in injection molding", Annual Technical Conference - ANTEC, Conference Proceedings. v. 3, 2011, p. 2426-2430 (2011)

Yao, Y., Dong, W., Zhao, L., Gao, F., "Multivariate statistical monitoring of multiphase batch processes with uneven operation durations", 2011 International Symposium on Advanced Control of Industrial Processes, ADCONIP 2011. 2011, p. 54-59 (2011)

Yang, Yi., Yao, ke., Gao, Furong., "Control System for Injection Molding Process", 7th International Conference on Advanced Molding and Materials Processing Technology. Wuhan, China, Vol. 1, pp. 113-133, Sept 10-12, (2010) (2010)

Yang, Y., Yao, K., Gao, F., "Design of an advanced injection molding control system", Annual Technical Conference - ANTEC, Conference Proceedings. v. 1, 2010, p. 553-557 (2010)

Tao, L., Gao, F., "Enhanced IMC-based load disturbance rejection design for integrating processes with slow dynamics", IFAC proceedings volumes. v. 9, (PART 1), 2010, p. 67-72 (2010)

Jiang, Zhijun., Yang, Yi., Gao, Furong., "Extruder Temperature Control Using Multivariable Generalized Predictive Control", 7th International Conference on Advanced Molding and Materials Processing Technology. Vol. 1, pp. 106-112, Sept 10-12, (2010) (2010)

Yao, ke., Gao, Furong., "FASTER PROCESS STABILIZATION FOR INJECTION MOLDING BY AUTOMATIC PROFILING OF PLASTICATION ROTATION SPEED", the Polymer Processing Society 26th Annual Meeting ~ PPS-26. ~ July 4-8, 2010 Banff (Canada) (2010)

Shi, Jia., Yang, Yi., Gao, Furong., "INJECTION MOLDING PROCESS CONTROL USING 2D MODEL PREDICTIVE ITERATIVE LEARNING ALGORITHM", the Polymer Processing Society 26th Annual Meeting ~ PPS-26. July 4-8, 2010 Banff (Canada) (2010)

Zhao, C., Gao, F., "Improved phase-based calibration modelling and quality prediction by investigating the effects of inter-phase correlation", IFAC proceedings volumes. v. 9, (PART 1), 2010, p. 355-360 (2010)

Gao, Furong., "Injection molding process monitoring and control", 2010 先進精密模具設備及檢測. 清雲ç§'技大學，台灣, 9 April, 2010 (2010)

Yao, K., Yang, Y., Zhou, F., Gao, F., "On-line in-mold transducer in injection molding", Annual Technical Conference - ANTEC, Conference Proceedings. v. 1, 2010, p. 571-575 (2010)

Yao, Y., Yang, Y., Yao, K., Gao, F., "The applications of multivariate statistical methods in injection molding process monitoring", Annual Technical Conference - ANTEC, Conference Proceedings. v. 1, 2010, p. 565-570 (2010)

Shi, J., Gao, F., Jiang, Q., Cao, Z., "A design framework for iterative learning control (ILC) based on 2-dimensional model predictive control (2D-MPC)", 2009 Chinese Control and Decision Conference, CCDC 2009. 2009, p. 1746-1751 (2009)

Zhao, C., Gao, F., Liu, T., Wang, F., "An improved statistical modeling strategy by spectroscopy for online monitoring and diagnosis of batch processes", Proceedings of 2009 7th Asian Control Conference, ASCC 2009. 2009, p. 893-898 (2009)

Yao, Yuan., Gao, Furong., "Batch Process Monitoring and Fault Diagnosis Based on Multi-Time-Scale Dynamic PCA Models", ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes. pp. 999-1004, Vol. 2, July 12-15, 2009, Istanbul, Turkey (2009)

Yao, K., Yang, Y., Gao, F., "Batch process control from practice to 2D model predictive control", 2009 Chinese Control and Decision Conference, CCDC 2009. 2009 (2009)

Qin, Xusong., Gao, Furong., Chen, Guohua., "Development of Wastewater Quality Monitoring System Using Sensor Fusion And Machine Learning Techniques", The 8th World Congress of Chemical Engineering. Montreal, 23-27 August, 2009 (2009)

Wang, Y., Zhou, D., Gao, F., "Fault-tolerant control for batch processes - Overview and outlook", 2009 Chinese Control and Decision Conference, CCDC 2009. 2009, p. 908-913 (2009)

Liu, T., Gao, F., Zhao, C., "Identification of low-order process model with time delay from closed-loop step test", Proceedings of the IEEE Conference on Decision and Control. 2009, p. 2587-2591 (2009)

Liu, Tao., Gao, Furong., "Identification of low-order unstable process model from closed-loop step test", ADCHEM 2009, International Symposium on Advanced Control of Chemical Processes. v.7, (1), 2009, p. 447-451, July, Istanbul, Turkey (2009)

Liu, T., Gao, F., Zhao, C., "Identification of time delay model for integrating processes from closed-loop step test", Proceedings of 2009 7th Asian Control Conference, ASCC 2009. 2009, p. 615-619 (2009)

Zhao, C., Gao, F., Liu, T., Wang, F., "Improved independent component regression modeling", Proceedings of the IEEE Conference on Decision and Control. 2009, p. 1507-1512 (2009)

Mo, S.Y., Yang, Y., Gao, F., "Iterative learning control of mold-open position in injection molding", Annual Technical Conference - ANTEC, Conference Proceedings. v. 5, 2009, p. 2946-2950 (2009)

Zhang, Lei., Chen, Xi., Gao, Furong., "An intelligent profiling strategy of injection velocity for uniform cavity filling based on recurrent neural network model", 18th INTERNATIONAL CONGRESS OF CHEMICAL AND PROCESS ENGINEERING. Vol. 4, p1332, 24-28 AUGUST 2008, PRAGUE, CZECH REPUBLIC (2008)

Yao, Ke., Yang, Yi., Gao, Furong., "Barrel Temperature Control in Injection Moulding Process", Symposium on Advanced Molding Technology and Materials Processing, SANTMP'08. Beijing, China. 16-17 November, 2008 (2008)

Gao, Furong., "Injection moulding control and optimization: from applied research to academic research", 北京自動化學會年會. 15 November, 2008. Beijing University of Science and Technology, Beijing (2008)

Gao, Furong., "Multi-phase batch process monitoring", 中國國家自然ç§'學基é‡'å§"雙清論壇. 北京西郊è³"館, 4－7 November, 2008 (2008)

Liu, Tao., Gao, Furong., "Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection", 17th IFAC World Congress. pp. 10933-10938, , July 6-11, 2008, Seoul, Korea (2008)

Yao, Yuan., Gao, Furong., "Stage-Oriented Statistical Batch Processes Monitoring, Quality Prediction and Improvement", 17th IFAC World Congress. pp. 4499-4510, July 6-11, 2008, Seoul, Korea (2008)

Lu, Junde., Gao, Furong., "Batch Process Modeling Based on Process Similarity", 8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico, 6-8 June, 2007. Vol. 2, pp. 379-384, 6-8 June, 2007 (2007)

Wang, Youqing., Yang, Yi., Gao, Furong., Zhou, Donghua., "Control of Multi-Phase Batch Processes: Formulation and Challenge", 8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico. Vol. 2, pp. 339-344, 6-8 June, 2007 (2007)

Qin, Xusong., Gao, Furong., Chen, Guohua., "Electrocoagulation and Electroflotation of Restaurant Wastewater â€" Pilot Plant Study", Advanced Technologies for Environmental Remediation â€" A Symposium in Honour of Professor Po Lock Yue, Hong Kong, June 15, 2007.. (2007)

Shi, Jia., Gao, Furong., "Higher-Order Generalized 2D Predictive Iterative Learning Control Schemes", 8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico. Vol. 2, pp. 243-248, 6-8 June, 2007 (2007)

Yao, Yuan., Lu, Ningyun., Gao, Furong., "Two-Dimensional Dynamic PCA with Auto-Selected Support Region", 8th International Symposium on Dynamics and Control of Process Systems, (DYCOPS-2007), Cancun, Mexico. Vol. 1, pp. 69-74, 6-8 June, 2007 (2007)

Shi, Jia., Gao, Furong., Wu, Tie-Jun., "2D MODEL PREDICTIVE ITERATIVE LEARNING CONTROL SCHEMES FOR BATCH PROCESSES", 8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006). Vol. 1, pp. 215-220, Brazil, April 2-5, 2006 (2006)

Gao, Furong., Wong, Ho Yin., Fung, Ka Tsai., Chen, Xi., "Development of A Capacitive Sensor for Injection Molding", Control of Particulate Processes VII, Engineering Conferences International, Harrison Hot Springs, BC, Canada. 29 October â€" 2 November, 2006 (2006)

Yang, Yi., Gao, Furong., "INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER", 8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006). Vol. 1, pp. 385-390, Brazil, April 2-5, 2006 (2006)

Gao, Furong., "Injection Molding Control & Monitoring", 第17屆中國過程控制會議, 2006å¹´7月31日－8月3æ—¥, 無錫, China (大會報å'Š). (2006)

Lu, Ningyun., Yao, Yuan., Gao, Furong., "PRODUCT DESIGN VIA PLS MODELING: STEPPING OUT OF HISTORICAL DATA INTO UNKNOWN OPERATING SPACE", 8th International Symposium on Advanced Control of Chemical Processes (ADCHEM 2006). Vol. II, pp. 951- 956, Brazil, April 2-5, 2006 (2006)

Gao, Furong., Fung, Ka Tsai., Chen, Xi., Yang, Yi., "Process/Quality Monitoring of Injection Molding Process using Capacitive Transducer", Proceedings - 2006 Academic Workshop on Advanced Forming Technology and Materials Processing，AWAFTMP'06. Shanghai, China. 21-25 October, 2006, pp. 38-46 (2006)

Gao, Furong., "注射成型用高性价比傳感器", 中國塑料加工工業協會塑料技術協作委員會, 2006年會暨塑料工業高新技術及產業化研討會 (Plastech2006), 12-15 August, 2006 (2006)

Yao, K., Gao, F., "Adaptive GPC control of barrel temperatures in injection molding", Annual Technical Conference - ANTEC, Conference Proceedings. v. 2, 2005, p. 378-382 (2005)

Gao, Furong., Fung, K.T., Chen, Xi., "In-Mold Monitoring of Injection using capacitive transducer", Advanced Forming Technology â€" 2005 Cross-Strait Academic Workshop on Advanced Technology of Materials Forming and Die/Mold (AWATMFDM"05), Xi"an, China. August 12-15, p. 447-460 (2005)

Yang, Y., Gao, F., "On-line check-ring failure detection and compensation in injection molding", Annual Technical Conference - ANTEC, Conference Proceedings. v. 3, 2005, p. 49-53 (2005)

Fung, Ka Tsai., Gao, Furong., Chen, Xi., "Part Weight Prediction Using Captive Transduer in Injection Molding", Society of Plastics Engineers Annual Technical Conference, ANTEC 2005, Boston, USA. v.2, May 1-5 2005, p. 823-827 (2005)

Fung, K.T., Gao, F., Chen, X., "Part weight prediction using capacitive transducer in injection molding", Annual Technical Conference - ANTEC, Conference Proceedings. v. 2, 2005, p. 388-392 (2005)

Gao, Furong., Yang, Yi., "Prospective of Injection Molding Control and Monitoring", 《中國å¡'料》論壇 â€" å¡'料注å¡'新技è¡"國際ç "討會. pp. 111-126, 12-14 July 2005, Shanghai, China (2005)

Jin, Zhiming., Gao, Furong., "基于在線測量技術的注塑成型塑化系統研究", 2005《中國塑料》論壇—— 塑料注塑新技術國際研討會。, pp. 132-136, 12-14 July, 2005, Shanghai, China (2005)

金志明, 高福荣, "基于在线测量技术的注塑成型塑化系统研究", 《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005,p. 132-136 (2005)

金志明, 朱复华, 高福荣, "注塑成型中的熔体温度均匀性研究", 《中国塑料》论坛—— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 340-346 (2005)

金志明, 朱复华, 高福荣, "注塑成型塑化过程的可视化研究", 《中国塑料》论坛 —— 塑料注塑新技术国际研讨会, Shanghai, China, July 12-14 2005, p. 343-346 (2005)

Ma, Liling., Wang, Fuli., Jiang, Yunbo., Gao, Furong., "A FAULT DIAGNOSIS METHOD FOR FERMENTATION PROCESS", Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong. January 11-14 2004, p. 746-750 (2004)

Shao, Cheng., Juan, Juan Nie., Gao, Furong., "A ROBUST ITERATIVE LEARNING CONTROL WITH NEURAL NETWORKS FOR ROBOT", Pre-print of 7th International Symposium on Adavanced Control of Chemical Processes, Hong Kong. January 11-14 2004, p. 873-878 (2004)

Lu, Ningyun., Yang, Yi., Wang, Fuli., Gao, Furong., "A stage-based monitoring method for batch process with minimal reference data", DYCOPS 2004, Boston USA. July 5-7 2004 (2004)

Shao, Cheng., Luo, Guangjun., Gao, Furong., "Robust Stable Adaptive Control Of Uncertain Bilinear Plants And Application For Distillation Column", 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong. 11-14 January, pp. 879-884 (2004)

Chang, Yuqing., Wang, Fuli., Gao, Furong., "SOFT-SENSING OF THE DRY POINT OF BENZENE USING PCA AND DRBFN", Pre-print of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong. January 11-14 2004, p. 740-745 (2004)

Yang, Yi., Gao, Furong., "Setting of Injection Velocity Profile via an Iterative Learning Control Approach", Proceedings of 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong. 11-14 January, pp. 639-644 (2004)

Lu, Ningyun., Yang, Yi., Gao, Furong., Wang, Fuli., "Stage-Based Multivariate Statistical Analysis for Injection Molding", 7th International Symposium on Advanced Control of Chemical Processes, Hong Kong. 11-14 January, pp. 471-476 (2004)

Yang, Yi., Gao, Furong., "Within Cycle Prediction of Injection Molding Product Weight Control based on Principal Component Regression", PPS-20 (Polymer Processing Society Annual Conference), Akron, Ohio, USA. June 20-24 2004 (2004)

Zhang, Yingwei., Wang, Fuli., Yu, Ge., Gao, Furong., "A Fault Accomodation Control for Nonlinear Processes", ADCHM 2003, Hong Kong, 18-20 June . (2003)

Gao, Furong., "Injection Molding Control: Challenge and Prospective", 7th International Conference on Manufacturing Technology: Global Manufacturing & Innovation, Chiang Chen Industrial Charity Foundation, Hong Kong Convention Center. 7-9 December (2003)

Ma, Liling., Jiang, Yubao., Wang, Fuli., Gao, Furong., "Multi-PCA Models for Process Monitoring and Fault Diagnosis", ADCHM 2003, Hong Kong . (2003)

Shao, Cheng., Luo, Guangjun., Gao, Furong., "Robust Stable Adaptive Control of Uncertain Bilinear Plants and Application for Distillation Column", ADCHM 2003, Hong Kong, 18-20 June . (2003)

Gao, Furong., Chen, Xi., "Setting of Injection Molding Packing profile", Advanced Molding and Mold Conference. 94-99 (2003)

Yang, Yi., Gao, Furong., "Setting of Injection Velocity Profile via an Iterative Learning Control Approach", ADCHM 2003, Hong Kong, 18-20 June . (2003)

Lu, Ningyun., Yang, Yi., Gao, Furong., Wang, Fuli., "Stage-Based Multivariate Statistical Analysis for Injection Molding", ADCHM 2003, Hong Kong, 18-20 June . (2003)

Jin, Zhiming., Gao, Furong., "Solid-bed break-up during plastication in injection molding", Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA. 1, 572-575 (2002)

Yang, Yi., Gao, Furong., "Fuzzy modeling for injection molded part quality control", Society of Plastics Engineers, Annual Technical Conference, 5-9 May, San Francisco, USA. 1, 629-632 (2001)

Shao, Cheng., Yang, Yi., Gao, Furong., Wang, Fuli., "Optimal iterative learning control with uncertain initializations and disturbances", 6th IFAC Symposium on Dynamics and control of process systems, Chejudo Island, Korea. June 4-6 2001, p. 437-442 (2001)

Gao, FR., Ji, ZM., Chen, X., "A transparent barrel for study of reciprocationg screw injection molding", Society of Plastics Engineers, Annual Technical Conference (ANETC2000), Orlando, USA , May 7-11 2000, p. 523-527 (2000)

Chen, X., Gao, FR., "An on-line measurement scheme of melt-front-area during injection filling via a soft-sensor implementation", ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III. 2000, p. 633-637 (2000)

Yu, Li., Gao, Furong., Xue, Anke., "Guaranteed cost control of uncertain discrete linear time-delay systems", American Control Conference 2000, Chicago, Illinois, USA. June 28-30 2000, p. 2481-2485 (2000)

Wang, Fuli., Gao, Furong., Li, Mingzhong., "Modelling and control of processes with output dynamic nonlinearity", American Control Conference 2000, Chicago, Illinois, USA. June 28-30 2000, p. 240-244 (2000)

Yu, Li., Gao, Furong., "Robust Hï‚¥ Control of Discrete-time Linear System with Delayed Sate and Frobenius Norm-bounded Uncertainties", The 39th IEEE Conference on Decision and Control, Sydney, Australia. December 12-15 2000, p. 2754-2755 (2000)

Gao, F., Shao, C., Wang, F., Wang, W., "Robust adaptive control of bilinear plants with high-order perturbation uncertainties", Proceedings of the IEEE Conference on Decision and Control. v. 5, 2000, p. 4934-4938 (2000)

Yang, Y., Gao, FR., "A comparison of different strategies for injection filling velocity control", ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;. 1999, p. 705-709 (1999)

Gao, FR., Tian, YC., "A double-controller scheme for controlling dominant delay processes", DYNAMICS & CONTROL OF PROCESS SYSTEMS 1998, VOLUMES 1 AND 2. 1999, p. 443-448 (1999)

Yang, Yi., Gao, Furong., "Adaptive Control of Injection Velocity of Thermoplastics Injection Molding", 14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China. v. N, 1999, p. 253-258 (1999)

Gao, Furong., Yang, Yi., "Adaptive Model Predictive Control of Filling Velocity of Thermoplastics Injection Molding", APCChE"99, Korea. v. 2, August 1999, p. 1009-1012 (1999)

Tian, Yu-Chu., Gao, Furong., Tade, Moses O., Tang, Jinyu., "Control of Integrator Processes with Long Dead-Time", 14th World Congress of IFAC, International Federation of Automatic Control, Beijing, China. v. C, 1999, p. 277-282 (1999)

Chan, Hong Shing., Leng, Yang., Gao, Furong., "Injection Molding of Liquid Crystalline Polymers Reinforced Polycarbonate", Preprints of 2nd East Asian Polymer Conference, Hong Kong. January 12-16 1999, p. 345-346 (1999)

Wang, Baoguo., Gao, Furong., Yue, Polock., "Neural Networks Prediction of Melt Temperatures at Plastication Phase", Preprints of 2nd East Asian Polymer Conference, Hong Kong. January 12-16 1999, p. 353-354 (1999)

Gao, Furong., Wang, Baoguo., Yue, Polock., "On-line Prediction of Melt Temperature at Injection Nozzle Exit Using Neural Networks", PPS-15, The Polymer Processing Society, CD-ROM, The Netherlands. May 31 - June 4 1999 (1999)

Gao, Furong., Wang, Fuli., Li, Mingzhong., "Predictive Control with Neuro-compensation for a Class of Nonlinear Processes", 7th European Conference on Intelligent Techniques and Soft Computing, (EUFITT"99), CD-Rom, Aachen, Germany. September 13-16 1999 (1999)

Tsoi, Hoi-Pang., Gao, Furong., "A Fuzzy Logic Controller for Injection Ram Velocity", Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA. April 26 - May 1 1998 (1998)

Tsoi, HP., Gao, FR., "A fuzzy logic controller for injection ram velocity", CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS. v. 44, 1998, p. 641-644 (1998)

Gao, Furong., Yi, Yang., "Adaptive Control of Nozzle Melt Packing Pressure", Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA. April 26 - May 1 1998, p. 472-476 (1998)

Yi, Y., Gao, FR., "Adaptive control of nozzle melt packing pressure", CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS. v. 44, 1998, p. 472-476 (1998)

Zhao, Chunhua., Gao, Furong., "An Experimental Analysis of Injection Melt Temperature", Society of Plastics Engineers, Annual Technical Conference (ANTEC'98), Atlanta, USA. April 26 - May 1 1998 (1998)

Zhao, CH., Gao, FR., "An experimental analysis of injection molding melt temperature", CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS. v. 44, 1998, p. 393-397 (1998)

Gao, Furong, Zhao, Chunhua, 平塚和人, 蔡文遠 , "射出成形におけるファヅィ理論を用いた自動保壓切換", 成形加工シソポヅァ, 1998, p. 273-276 (1998)

Tian, Yu-Chu., Gao, Furong., "Complicated Dynamics in Simple Delay Systems", 1997 China-Korea Joint Workshop on Process Systems Engineering, Hangzhou, China. June 27-29 1997, p. 58-63 (1997)

Tian, YC; Gao, FR, "Simple delay systems with chaotic dynamics", CONTROL OF OSCILLATIONS AND CHAOS - 1997 1ST INTERNATIONAL CONFERENCE, PROCEEDINGS, VOLS 1-3. 1997, p. 319-320 (1997)

Patent

Gao, Furong; Zhao, Chunhua, "Method and apparatus for the control of injection molding", US Patent. 6,309,571. Washington, DC: US Patent and Trademark Office, 2001 (2001)

ĸ€ ĺ© ĸ‰ ň† Åœ° System Design

Source: https://cbe.ust.hk/cgi-bin/pub_details.php?people_email=kefgao

Share this post