2018 Dodge Grand Caravan Compass Without Navigation

• Contents
• Table of Contents
• Troubleshooting
• Bookmarks

Quick Links

• 11

  Getting to Know Your Vehicle

  • 15

    Power Sliding Side Door - if Equipped

  • 20

    Second Row Bench Seat - if Equipped

  • 21

    Supplemental Active Head Restraints - Front Seats

  • 23

    Head Restraints - Third Row

  • 24

    Heated Steering Wheel - if Equipped

  • 24

    Tilt/Telescoping Steering Column

  • 25

    Heated Mirrors - if Equipped

  • 26

    Automatic Headlights

  • 26

    Daytime Running Lights (DRL) - if Equipped

  • 26

    Multifunction Lever

  • 27

    Headlight Delay - if Equipped

  • 41

    Power Liftgate - if Equipped

  • 46

    Electrical Power Outlets - if Equipped

  • 48

    Power Inverter - if Equipped

• 51

  Getting to Know Your Instrument Panel

• 63

  Safety

• 111

  Starting and Operating

• 125

  In Case of Emergency

• 153

  Servicing and Maintenance

• 177

  Technical Specifications

• 183

  Multimedia

2018

G R A N D C A R A V A N

USER

GUIDE

Chapters

• 11

  Getting to Know Your Vehicle

  • 15

    Power Sliding Side Door - if Equipped

  • 20

    Second Row Bench Seat - if Equipped

  • 21

    Supplemental Active Head Restraints - Front Seats

  • 23

    Head Restraints - Third Row

  • 24

    Heated Steering Wheel - if Equipped

  • 24

    Tilt/Telescoping Steering Column

  • 25

    Heated Mirrors - if Equipped

  • 26

    Automatic Headlights

  • 26

    Daytime Running Lights (DRL) - if Equipped

  • 26

    Multifunction Lever

  • 27

    Headlight Delay - if Equipped

  • 41

    Power Liftgate - if Equipped

  • 46

    Electrical Power Outlets - if Equipped

  • 48

    Power Inverter - if Equipped

• 51

  Getting to Know Your Instrument Panel

• 63

  Safety

• 111

  Starting and Operating

• 125

  In Case of Emergency

• 153

  Servicing and Maintenance

• 177

  Technical Specifications

• 183

  Multimedia

  Also See for Dodge Grand Caravan 2018

  Related Manuals for Dodge Grand Caravan 2018

  Summary of Contents for Dodge Grand Caravan 2018

• Page 1 2018 G R A N D C A R A V A N USER GUIDE...
• Page 2 I M P O R T A N T G et wa rr a n t y a n d other information onl ine – yo u can rev i ew a nd p ri n t o r d ow n l oa d a c o p y o f t h e Ow n e r's Man ual , N a vi ga t ion / U con n ect manuals and the l imite d w arra nti es prov id ed b y F CA US L L C fo r yo u r ve h i cl e b y vi s it ing ww w.m op a r.co m ( U.S.) or www.owners.
• Page 3 Congratulations on selecting your new FCA US This User Guide has been prepared to help you For more detailed descriptions of the topics LLC vehicle. Be assured that it represents preci- quickly become acquainted with the important discussed in this User Guide, as well as infor- mation covering features and processes not cov- sion workmanship, distinctive styling, and high features of your vehicle.
• Page 4 HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS To identify the chapter with the information needed you can consult the index at the end of While reading this User Guide you will find a Essential Information this User Guide. series of WARNINGS to be followed to prevent Each time direction instructions (left/right or Chapters can be rapidly identified with dedi- incorrect use of components which could cause...
• Page 5 GRAPHICAL TABLE OF CONTENTS GETTING TO KNOW YOUR VEHICLE GETTING TO KNOW YOUR INSTRUMENT PANEL SAFETY STARTING AND OPERATING IN CASE OF EMERGENCY SERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS MULTIMEDIA CUSTOMER ASSISTANCE INDEX...
• Page 7 GRAPHICAL TABLE OF CONTENTS GRAPHICAL TABLE OF CONTENTS INSTRUMENT PANEL ....6 INTERIOR..... .7...
• Page 8 INSTRUMENT PANEL Instrument Panel 1 — Air Vents 2 — Instrument Cluster Display Controls 3 — Steering Wheel 4 — Instrument Cluster 5 — Speed Controls 6 — Radio...
• Page 9 INTERIOR Interior Features 1 — Gear Selector 2 — Driver Temperature Control Knob 3 — Glove Compartment 4 — Seats 5 — Blower Control Knob 6 — Instrument Cluster Display Controls...

• Page 11: Table Of Contents

  GETTING TO KNOW YOUR VEHICLE GETTING TO KNOW YOUR VEHICLE KEYS ..... . .11 Head Restraints — Second Row Bench . . .21 Lane Change Assist .
• Page 12 Programming A Non-Rolling Code ..41 Canadian/Gate Operator Programming ..42 Using HomeLink ....43 Security .....43 Troubleshooting Tips .

• Page 13: Keys

  KEYS To Unlock The Doors And Liftgate NOTE: When using the emergency key to gain access to Push and release the unlock button on the key Key Fobs your vehicle, be aware that the security alarm fob once to unlock the doors. Push and release may be triggered.

• Page 14: Remote Start - If Equipped

  VEHICLE SECURITY ALARM — NOTE: • The engine can be started two consecutive Changes or modifications not expressly ap- times (two 15-minute cycles) with the key IF EQUIPPED fob. However, the ignition must be placed in proved by the party responsible for compliance the ON/RUN position before you can repeat could void the user's authority to operate the The vehicle security alarm monitors the vehicle...

• Page 15: To Disarm The System

  DOORS 2. Perform one of the following methods to lock • The vehicle security alarm remains armed during power liftgate entry. Pushing the lift- the vehicle: gate button will not disarm the vehicle secu- Power Sliding Side Door — If Equipped •...

• Page 16: Seats

  SEATS open the power sliding door. If the switch is • If anything obstructs the power sliding side door while it is closing or opening, the door pushed while the door is under a power cycle, will automatically reverse to the closed or Seats are a part of the Occupant Restraint the door will reverse direction.
• Page 17 You can choose from HI, LO or OFF heat set- Vehicles Equipped With Remote Start WARNING! tings. Amber indicator lights in each switch On models that are equipped with remote start, indicate the level of heat in use. Two indicator •...

• Page 18: Stow 'N Go Seating

  Rear Heated Seats Second Row Stow 'n Go Push the switch once to select HI-level heating. Push the switch a second time to select LO-level On some models, the second row seats are On vehicles equipped with Stow 'n Go seats, the heating.
• Page 19 of time. This is normal and by simply open- CAUTION! WARNING! ing the seats to the open position, over time • Do not sit on the second row seat when it is • Sitting in a seat with the head restraint in the seat cushion will return to its normal in the stowed position with the seatback its lowered position could result in serious...

• Page 20: Second Row Bench Seat - If Equipped

  Easy Entry Second Row To reinstall the seat, align the seat into the 4. Pull release strap marked "3" to release the detent positions on the floor. Squeeze the re- anchors. The second row Stow 'n Go seats allow easy lease handle and rotate upward until the lock 5.

• Page 21: Head Restraints

  HEAD RESTRAINTS Supplemental Active Head Restraints — WARNING! Front Seats Head restraints are designed to reduce the risk • In a collision, you or others in your vehicle Active Head Restraints are passive, deployable of injury by restricting head movement in the could be injured if seats are not properly components, and vehicles with this equipment event of a rear impact.
• Page 22 To raise the head restraint, pull upward on the For comfort, the Active Head Restraints can be head restraint. To lower the head restraint, push tilted forward and rearward. To tilt the head the adjustment button, located at the base of restraint closer to the back of your head, pull the head restraint, and push downward on the forward on the bottom of the head restraint.

• Page 23: Head Restraints - Second Row Quad Seats

  Head Restraints — Third Row WARNING! WARNING! The head restraint in the center position can be straint ensure that all cargo is secured, as • ALL the head restraints MUST be rein- raised and lowered for tether routing. Refer to loose cargo could contact the Active Head stalled in the vehicle to properly protect "Occupant Restraints"...

• Page 24: Steering Wheel

  STEERING WHEEL downward as desired. To lengthen or shorten the The heated steering wheel control button is steering column, pull the steering wheel out- located on the center of the instrument panel Tilt/Telescoping Steering Column below the climate controls. ward or push it inward as desired. To lock the steering column in position, push the lever up- •...

• Page 25: Mirrors

  Heated Mirrors — If Equipped WARNING! These mirrors are heated to melt frost or ice. when using the steering wheel heater. It This feature will be activated whenever you turn may cause burns even at low tempera- on the rear window defroster (if equipped). Re- tures, especially if used for long periods.

• Page 26: Multifunction Lever

  Multifunction Lever is turned OFF. The lights illuminate at less than Automatic Headlights half of normal intensity. If the parking brake is The multifunction lever is located on the left This system automatically turns the headlights applied, the Daytime Running Lights (DRL) will side of the steering column.

• Page 27: Headlights On With Wipers - If Equipped

  Headlights On With Wipers — If Equipped When exiting the vehicle the driver can choose Front Fog Lights — If Equipped to have the headlights remain on for 30, 60 or When your headlights are in the AUTO mode 90 seconds or not remain on. To change the To activate the front fog lights, turn and the engine is running, the headlights will timer setting, see an authorized dealer.

• Page 28: Lane Change Assist

  WINDSHIELD WIPER AND Lane Change Assist Windshield Wiper Operation WASHERS Tap the lever up or down once, without moving Rotate the end of the lever upward, to the first beyond the detent, and the turn signal (right or detent past the intermittent settings for low- The wipers and washers are operated by a left) will flash three times then automatically speed wiper operation.

• Page 29: Rear Wiper And Washer

  Windshield Washers Rear Wiper And Washer To use the windshield washer, push on the end Rotating the center ring of the wiper lever to the of the lever to the second detent and hold while first detent activates the rear intermittent wip- ers.

• Page 30: Climate Controls

  CLIMATE CONTROLS Automatic Climate Control Overview Automatic Temperature Controls Automatic Climate Control Descriptions Icon Description A/C Button Push the A/C button to engage the Air Conditioning (A/C). An LED will illuminate when the A/C system is engaged. Automatic Operation Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the system to switch between manual mode and automatic modes.
• Page 31 Icon Description Recirculation Button Push this button to change the system between recirculation mode and outside air mode. Recirculation can be used when out- side conditions such as smoke, odors, dust, or high humidity are present. NOTE: • Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended.
• Page 32 Icon Description Blower Control There are seven blower speeds. Use this control to regulate the amount of air forced through the system in any mode you se- lect. The blower speed increases as you move the control clockwise from the off position. NOTE: Depending on the configuration, your vehicle may be equipped with four blower speeds.
• Page 33 Icon Description Floor Mode Floor Mode Toggle the Modes Control Button until you see Floor Mode Icon on the display. Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Toggle the Modes Control Button until you see Mix Mode Icon on the display.
• Page 34 Controlling The Rear Climate Controls From the floor outlets or cool, dehumidified air through the headliner outlets. The rear system The Front ATC Panel temperature control buttons are located in the The rear ATC system has floor air outlets at the Uconnect system, located on the instrument rear right side of the 3rd Row seats and over- panel.
• Page 35 Icon Description SYNC Button — If Equipped Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is illuminated when this fea- ture is enabled. SYNC is used to synchronize the rear passenger temperature setting with the driver temperature setting. The SYNC feature also synchronizes the front passenger's temperature to the driver temperature setting.
• Page 36 Rear Automatic Temperature Control (ATC) Once the desired temperature is displayed, the ATC System will automatically achieve and — If Equipped maintain that comfort level. When the system is The Three-Zone ATC system allows for adjust- set up for your comfort level, it is not necessary ment of the rear climate controls from the front to change the settings.
• Page 37 Icon Description Panel Mode Rear Panel Mode Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of the outlets to one side will shut off the airflow. Rear Bi-Level Mode Bi-Level Mode Air comes from both the headliner outlets and the floor outlets.

• Page 38: Climate Control Functions

  Icon Description Rear AUTO Mode Rear AUTO is selected by adjusting the rear blower knob counterclockwise to AUTO. The ATC system will automatically achieve and maintain that comfort level. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically.

• Page 39: Automatic Temperature Control (Atc) - If Equipped

  Winter Operation Automatic Temperature Control (ATC) — • The temperature can be displayed in U.S. or Metric units by selecting the US/Metric cus- If Equipped To ensure the best possible heater and defroster tomer programmable feature. To provide you performance, make sure the engine cooling sys- Automatic Operation with maximum comfort in the Automatic tem is functioning properly and the proper...

• Page 40: Hood

  A/C Air Filter 2. Move to the front of the vehicle and look CAUTION! inside the center of the hood opening. Lo- The climate control system filters out dust and cate, then push the safety catch downward Failure to follow these cautions can cause pollen from the air.

• Page 41: Liftgate

  LIFTGATE GARAGE DOOR OPENER — IF To Close The Liftgate EQUIPPED The liftgate can also be closed using the Rear Power Liftgate — If Equipped Interior Power Liftgate button (if equipped), HomeLink replaces up to three remote controls located in the upper left trim in the liftgate The power liftgate may be opened or closed in (hand-held transmitters) that operate devices such opening.

• Page 42: Before You Begin Programming Homelink

  Before You Begin Programming HomeLink Programming A Rolling Code For programming garage door openers that were Be sure that your vehicle is parked outside of manufactured after 1995: the garage before you begin programming. These garage door openers can be identified by For more efficient programming and accurate the "LEARN"...

• Page 43: Programming A Non-Rolling Code

  4. Continue to hold both buttons and observe NOTE: NOTE: the indicator light. The HomeLink indicator If the garage door opener/device does not For vehicles equipped with Keyless Enter-N- Go, place the ignition in the RUN position will flash slowly and then rapidly after activate, push the button a third time (for with the engine ON.

• Page 44: Canadian/Gate Operator Programming

  5. Push and hold the programmed HomeLink Canadian/Gate Operator Programming onds until HomeLink has successfully ac- button and observe the indicator light. cepted the frequency signal. The indicator For programming transmitters in Canada/ light will flash slowly and then rapidly when •...

• Page 45: Using Homelink

  Using HomeLink Troubleshooting Tips WARNING! To operate, push and release the programmed If you are having trouble programming • Your motorized door or gate will open and HomeLink button. Activation will now occur for HomeLink, here are some of the most common close while you are programming the univer- the programmed device (i.e.

• Page 46: General Information

  INTERNAL EQUIPMENT General Information CAUTION! The following regulatory statement applies to all Electrical Power Outlets — If Equipped • Do not exceed the maximum power of Radio Frequency (RF) devices equipped in this 160 Watts (13 Amps) at 12 Volts. If the vehicle: Two 12 Volt (13 Amp) power outlets are located 160 Watt (13 Amp) power rating is ex-...
• Page 47 The power outlets include tethered caps, la- beled with a key or battery symbol indicating the power source. The power outlet, located on the lower instrument panel, is powered directly from the battery. Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting.

• Page 48: Power Inverter - If Equipped

  Power Inverter — If Equipped To turn on the power outlet, push the switch CAUTION! once. Push the switch a second time to turn the A 115 Volt, 150 Watt inverter outlet converts power outlet off. • Many accessories that can be plugged in DC current to AC current, and is located on the draw power from the vehicle's battery, even This outlet can power cellular phones, electron-...

• Page 49: Smoker's Package Kit - If Equipped

  Smoker's Package Kit — If Equipped WARNING! With the optional authorized dealer installed To avoid serious injury or death: Smoker's Package Kit, a removable ash receiver • Do not insert any objects into the recep- is inserted into one of the two cupholders in the tacles.
• Page 51 GETTING TO KNOW YOUR INSTRUMENT PANEL GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY ..50 Key Fob Programmable Features ..52 Green Indicator Lights ... . .58 Blue Indicator Lights.

• Page 52: Instrument Cluster Display

  INSTRUMENT CLUSTER DISPLAY Instrument Cluster Display Location And The system allows the driver to select informa- tion by pushing the following buttons mounted Controls Your vehicle is equipped with an instrument on the steering wheel: The vehicle's instrument cluster is equipped cluster display, which offers useful information with an instrument cluster display, which offers to the driver.

• Page 53: Oil Life Reset

  • Down Button Oil Life Reset Instrument Cluster Display— If Equipped Push and release the down but- • Your vehicle is equipped with an engine oil Personal Settings allows you to set and recall ton to scroll downward through change indicator system. The "Oil Change features when the transmission is in PARK.

• Page 54: Key Fob Programmable Features

  Flashing Lights With Lock 2. Release both buttons at the same time. • Horn With Remote • Park Assist - Lock If Equipped Auto Unlock Doors On Exit The turn signal lights flash when the doors are • Flash Lamps With •...

• Page 55: Red Warning Lights

  Red Warning Lights Booster has been detected by the Anti-Lock WARNING! Brake System (ABS) / Electronic Stability Con- — Air Bag Warning Light trol (ESC) system. In this case, the light will Driving a vehicle with the red brake light on is remain on until the condition has been cor- dangerous.
• Page 56 — Electronic Throttle Control (ETC) NOTE: on when the ignition is placed in the ON/RUN or This light shows only that the parking brake is Warning Light ACC/ON/RUN position and remain on briefly as applied. It does not show the degree of brake a bulb check.

• Page 57: Yellow Warning Lights

  — Liftgate Open Warning Light When driving, if the driver or front passenger CAUTION! seat belt remains unbuckled, the Seat Belt This indicator will turn when the liftgate is open. Reminder Light will flash or remain on continu- Continuous driving with the Transmission NOTE: ously and a chime will sound.
• Page 58 — Low Washer Fluid Warning Light — If the ABS light remains on or turns on while • The "ESC Off Indicator Light" and the "ESC driving, then the Anti-Lock portion of the brake Indicator Light" come on momentarily each If Equipped time the ignition is placed in the ON/RUN or system is not functioning and service is required as...
• Page 59 — Tire Pressure Monitoring System When the engine is running, the MIL may flash ard or tire inflation pressure label. (If your ve- to alert serious conditions that could lead to hicle has tires of a different size than the size (TPMS) Warning Light immediate loss of power or severe catalytic indicated on the vehicle placard or tire inflation...

• Page 60: White Indicator Lights

  Your vehicle has also been equipped with a Green Indicator Lights CAUTION! TPMS malfunction indicator to indicate when — Speed Control SET Indicator Light the system is not operating properly. The TPMS The TPMS has been optimized for the origi- malfunction indicator is combined with the low nal equipment tires and wheels.

• Page 61: Blue Indicator Lights

  — Front Fog Indicator Light — If ONBOARD DIAGNOSTIC SYSTEM — CAUTION! Equipped OBD II • Prolonged driving with the MIL on could This indicator light will illuminate when the Your vehicle is equipped with a sophisticated cause further damage to the emission con- front fog lights are on.
• Page 62 WARNING! • ONLY an authorized service technician should connect equipment to the OBD II connection port in order to read the VIN, diagnose, or service your vehicle. • If unauthorized equipment is connected to the OBD II connection port, such as a driver-behavior tracking device, it may: •...
• Page 63 SAFETY SAFETY AUXILIARY DRIVING SYSTEMS ..62 Seat Belt Systems ....68 Exhaust Gas ....105 Supplemental Restraint Systems (SRS) .

• Page 64: Auxiliary Driving Systems

  AUXILIARY DRIVING SYSTEMS Rear Cross Path (RCP) The Rear Cross Path (RCP) feature is intended Blind Spot Monitoring to aid the driver when backing out of parking spaces where their vision of oncoming vehicles The Blind Spot Monitoring (BSM) system uses two radar-based sensors located inside the rear may be blocked.
• Page 65 When RCP is on and the vehicle is in REVERSE, Blind Spot Alert Lights Only NOTE: the driver is alerted using both the visual and • Whenever an audible alert is requested by the When operating in Blind Spot Alert mode, the audible alarms, including reducing the radio BSM system, the radio volume is reduced.

• Page 66: Tire Pressure Monitor System (Tpms)

  General Information The tire pressure will vary with temperature by Once the low tire pressure warning (Tire Pres- approximately 1 psi (7 kPa) for every 12°F sure Monitoring Telltale Light) illuminates, you The following regulatory statement applies to all (6.5°C). This means that when the outside tem- must increase the tire pressure to the recom- Radio Frequency (RF) devices equipped in this mended cold placard pressure in order for the...
• Page 67 the "Tire Pressure Monitoring Telltale Light" will • Driving on a significantly underinflated tire CAUTION! turn off only after the tires are inflated to the causes the tire to overheat and can lead to tire a poor overall system performance or sen- failure.
• Page 68 NOTE: NOTE: • Jamming due to electronic devices or driving It is particularly important for you to check the When filling warm tires, the tire pressure may next to facilities emitting the same radio fre- quencies as the TPMS sensors. tire pressure in all of your tires regularly and to need to be increased up to an additional 4 psi (28 kPa) above the recommended cold placard...

• Page 69: Occupant Restraint Systems

  • After driving for up to 20 minutes above 20 minutes above 15 mph (24 km/h). The (2) This device must accept any interference 15 mph (24 km/h), the "Tire Pressure Moni- TPMS will chime, the "TPM Telltale Light" will received, including interference that may cause toring Telltale Light"...

• Page 70: Important Safety Precautions

  Important Safety Precautions do not use child restraints or belt-positioning WARNING! booster seats should ride properly buckled up Please pay close attention to the information in in the rear seat of a vehicle with a rear seat. • Never place a rear-facing child restraint in this section.
• Page 71 Enhanced Seat Belt Use Reminder System BeltAlert Warning Sequence The outboard front passenger seat BeltAlert is not active when the outboard front passenger (BeltAlert) The BeltAlert warning sequence is activated seat is unoccupied. BeltAlert may be triggered when the vehicle is moving above a specified Driver and Passenger BeltAlert (if equipped) when an animal or other items are placed on the vehicle speed range and the driver or outboard...
• Page 72 Lap/Shoulder Belts WARNING! WARNING! All seating positions in your vehicle are • It is dangerous to ride in a cargo area, belt or a lap belt for more than one person, no equipped with lap/shoulder belts. inside or outside of a vehicle. In a collision, matter what their size.
• Page 73 WARNING! WARNING! • A seat belt that is too loose will not protect • A frayed or torn seat belt could rip apart in a you properly. In a sudden stop, you could collision and leave you with no protection. move too far forward, increasing the possi- Inspect the seat belt system periodically, bility of injury.
• Page 74 Lap/Shoulder Belt Untwisting Procedure 4. Position the lap belt so that it is snug and lies low across your hips, below your abdo- Use the following procedure to untwist a twisted men. To remove slack in the lap belt portion, lap/shoulder belt.
• Page 75 Second Row Center (If Equipped) and Third NOTE: The adjustable upper shoulder belt anchorage is Row Center Seat Belt Operating Instructions equipped with an Easy Up feature. This feature The second row center (if equipped) and third allows the shoulder belt anchorage to be ad- row center seat belts feature a seat belt with a justed in the upward position without pushing or mini-latch plate and buckle, which allows the...
• Page 76 2. Grasp the mini-latch plate and pull the seat belt over the seat. Mini-Latch And Buckle Connected Connect Mini-Latch To Buckle 4. When the seat belt is long enough to fit, 5. Sit back in seat. Slide the regular latch plate Mini-Latch Stowage insert the mini-latch plate into the mini- up the webbing as far as necessary to allow...
• Page 77 9. To release the seat belt, push the red button on the buckle. 10. To disengage the mini-latch plate from the mini-buckle for storage, insert the regular latch plate into the center red slot on the mini-buckle. The seat belt will automati- cally retract to its stowed position.
• Page 78 Seat Belt Extender Position the lap belt snug and low below the WARNING! abdomen and across the strong bones of the If a seat belt is not long enough to fit properly, long enough and only use in the recom- hips.
• Page 79 Energy Management Feature If the passenger seating position is equipped with an ALR and is being used for normal usage, The front seat belt system is equipped with an only pull the seat belt webbing out far enough to Energy Management feature that may help fur- comfortably wrap around the occupant's mid- ther reduce the risk of injury in the event of a section so as to not activate the ALR.
• Page 80 How The Active Head Restraints (AHR) Work WARNING! WARNING! The Occupant Restraint Controller (ORC) deter- • Never place a rear-facing child restraint in • The seat belt assembly must be replaced if mines whether the severity or type of rear im- front of an air bag.
• Page 81 Active Head Restraint (AHR) Components: Resetting Active Head Restraints (AHR) WARNING! • All occupants, including the driver, should not operate a vehicle or sit in a vehicle's seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.

• Page 82: Supplemental Restraint Systems (Srs)

  Air Bag System Components on the driver's and front passenger's seat before the battery loses power or it becomes discon- driving. Personally attempting to reset the AHRs nected prior to deployment. • Occupant Restraint Controller (ORC) may result in damage to the AHRs that could The ORC turns on the Air Bag Warning Light in •...
• Page 83 Front Air Bags • The Air Bag Warning Light remains on after WARNING! the four to eight-second interval. This vehicle has front air bags and lap/shoulder • Being too close to the steering wheel or • The Air Bag Warning Light comes on intermit- belts for both the driver and front passenger.
• Page 84 The first stage inflator is triggered immediately On the other hand, depending on the type and WARNING! during an impact that requires air bag deploy- location of impact, front air bags may deploy in ally. You may damage the air bags and you crashes with little vehicle front-end damage but ment.
• Page 85 Knee Impact Bolsters Supplemental Side Air Bags The Knee Impact Bolsters help protect the Supplemental Seat-Mounted Side Air Bags knees of the driver and front passenger, and (SABs) position the front occupants for improved inter- This vehicle is equipped with Supplemental action with the front air bags.
• Page 86 and with such a high force that it could injure belted and seated properly, or if items are posi- occupants if they are not seated properly, or if tioned in the area where the SABICs inflate. Children are at an even greater risk of injury items are positioned in the area where the SAB from a deploying air bag.
• Page 87 Side Impacts Side Air Bags are a supplement to the seat belt WARNING! restraint system. Side Air Bags deploy in less The Side Air Bags are designed to activate in time than it takes to blink your eyes. • Side Air Bags need room to inflate. Do not certain side impacts.
• Page 88 Air Bag System Components If A Deployment Occurs Rollover Events Side Air Bags are designed to activate in certain The front air bags are designed to deflate imme- NOTE: diately after deployment. rollover events. The ORC determines whether The Occupant Restraint Controller (ORC) moni- the deployment of the Side Air Bags in a par- tors the internal circuits and interconnecting NOTE:...
• Page 89 • As the air bags deflate, you may see some NOTE: Your vehicle may also be designed to perform smoke-like particles. The particles are a nor- any of these other functions in response to the • Air bag covers may not be obvious in the mal by-product of the process that generates Enhanced Accident Response System: interior trim, but they will open during air bag...
• Page 90 Event Data Recorder (EDR) fuel tank before resetting the system and start- WARNING! ing the engine. If there are no fuel leaks or This vehicle is equipped with an event data the steering wheel hub trim cover or the damage to the vehicle electrical devices (e.g. recorder (EDR).

• Page 91: Child Restraints

  NOTE: Child Restraints There are different sizes and types of restraints EDR data are recorded by your vehicle only if a for children from newborn size to the child Everyone in your vehicle needs to be buckled up non-trivial crash situation occurs; no data are almost large enough for an adult safety belt.
• Page 92 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and Either an Infant Carrier or a Convertible Child Re- Infants and Toddlers who have not reached the height or weight limits straint, facing rearward in the rear seat of the ve- of their child restraint...
• Page 93 Older Children And Child Restraints WARNING! WARNING! Children who are two years old or who have Do not install a rear-facing car seat using a • Improper installation can lead to failure of outgrown their rear-facing convertible child seat rear support leg in this vehicle. The floor of an infant or child restraint.
• Page 94 Children Too Large For Booster Seats 3. Does the shoulder belt cross the child's belt out of position. If the shoulder belt contacts shoulder between their neck and arm? the face or neck, move the child closer to the Children who are large enough to wear the center of the vehicle, or use a booster seat to 4.
• Page 95 Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint are used to install LATCH-equipped child seats (LATCH) Restraint System anchorage system called LATCH, which stands without using the vehicle's seat belts. Some for Lower Anchors and Tethers for CHildren. The seating positions may have a top tether anchor- LATCH system has three vehicle anchor points age but no lower anchorages.
• Page 96 LATCH Positions For Installing Child Re- straints In This Vehicle 0502125629US 2nd Row Quad Seating – Same For Stow 'n Go And Non Stow 'n Go 2nd Row Bench Seat – LATCH Positions Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined What is the weight limit (child's weight + weight of the child weight of the child and the child restraint is 65 lbs...
• Page 97 Frequently Asked Questions About Installing Child Restraints With LATCH Never "share" a LATCH anchorage with two or more child restraints. If the center position does not have dedicated Can two child restraints be attached using a common lower LATCH lower anchorages, use the seat belt to install a child LATCH anchorage? seat in the center position next to a child seat using the LATCH anchorages in an outboard position.
• Page 98 Locating The LATCH Anchorages WARNING! The lower anchorages are round bars that Always make sure the head restraint is in its are found at the rear of the seat cushion where it upright position when the seat is to be used by meets the seatback.
• Page 99 Locating The Upper Tether Anchorages Quad and Stow n' Go Seating There are tether strap anchorages located be- hind the second row seating positions and the Bench Seating third row center seating position. The tether There are tether strap anchorages behind each anchorages are located on the back of the seat, rear seating position located on the back of the near the floor.
• Page 100 To Install A LATCH-Compatible Child Re- hook at the end to attach to the top tether anchorage and a way to tighten the strap after it straint is attached to the anchorage. If the selected seating position has a Switchable Center Seat LATCH Automatic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions...
• Page 101 Installing Child Restraints Using The Ve- 4. If the child restraint has a tether strap, con- system, buckle the seat belt behind the child nect it to the top tether anchorage. See the restraint and out of the child's reach. If the hicle Seat Belt section "Installing Child Restraints Using buckled seat belt interferes with the child re-...
• Page 102 Lap/Shoulder Belt Systems For Installing clicking noise while the webbing is pulled back into the retractor. Refer to the "Automatic Locking Child Restraints In This Vehicle Mode" description in "Switchable Automatic Locking Retractors (ALR)" under "Occupant Re- straint Systems" for additional information on ALR.
• Page 103 Frequently Asked Questions About Installing Child Restraints With Seat Belts The 2nd row head restraints on bench and fixed quad seats are remov- able. The 2nd row stow n' go head restraints are not removable. The Can the head restraints be removed? 3rd row center head restraint is removable in all vehicles, but the 3rd row outboard head restraints are not removable.
• Page 104 Installing A Child Restraint With A Cinching 1. Place the child seat in the center of the 6. Try to pull the webbing out of the retractor. If seating position. For some second row seats, it is locked, you should not be able to pull Latch Plate (CINCH) —...
• Page 105 Installing Child Restraints Using The Top 2. Next, pull enough of the seat belt webbing Any seat belt system will loosen with time, so from the retractor to pass it through the belt check the belt occasionally, and pull it tight if Tether Anchorage path of the child restraint.
• Page 106 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available.

• Page 107: Transporting Pets

  SAFETY TIPS 3. Attach the tether strap hook of the child Exhaust Gas restraint to the top tether anchorage as Transporting Passengers shown in the diagram. WARNING! NEVER TRANSPORT PASSENGERS IN THE 4. Remove slack in the tether strap according to Exhaust gases can injure or kill.

• Page 108: Safety Checks You Should Make Inside The Vehicle

  Air Bag Warning Light Floor Mat Safety Information Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be The Air Bag warning light will turn on for Always use floor mats designed to fit your ve- detected inside the vehicle, or when the under- four to eight seconds as a bulb check when the hicle.

• Page 109: Periodic Safety Checks You Should Make

  Periodic Safety Checks You Should Make WARNING! WARNING! Outside The Vehicle • ALWAYS REMOVE THE EXISTING FLOOR • ALWAYS make sure objects cannot fall or Tires slide into the driver's side floor area when MAT FROM THE VEHICLE before the vehicle is moving. Objects can become installing any other floor mat.
• Page 111 STARTING AND OPERATING STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS ..110 To Deactivate ....115 Loose Fuel Filler Cap Message ..119 Materials Added To Fuel .

• Page 112: Engine Break-In Recommendations

  ENGINE BREAK-IN CAUTION! WARNING! RECOMMENDATIONS • Unintended movement of a vehicle could Never use Non-Detergent Oil or Straight Min- injure those in or near the vehicle. As with eral Oil in the engine or damage may result. A long break-in period is not required for the all vehicles, you should never exit a vehicle engine and drivetrain (transmission and axle) in while the engine is running.

• Page 113: Fuel Economy (Econ) Mode

  WARNING! CAUTION! • Your vehicle could move and injure you Damage to the transmission may occur if the and others if it is not in PARK. Check by following precautions are not observed: trying to move the gear selector out of •...

• Page 114: Gear Ranges

  • The engine idle speed will be lower. to 4 (fourth gear), the transmission will not shift You can switch between DRIVE and ERS mode above fourth gear (except to prevent engine at any vehicle speed. When the gear selector is •...

• Page 115: Speed Control

  Transmission Gear Position Display Actual Gear(s) Allowed 1–2 1–3 1–4 1–5 1–6 1–6 NOTE: NOTE: To select the proper gear position for maximum In order to ensure proper operation, the Speed deceleration (engine braking), tap the gear se- Control System has been designed to shut down lector to the left (-) repeatedly as the vehicle if multiple Speed Control functions are operated slows.

• Page 116: To Activate

  To Activate To Vary The Speed Setting Metric Speed (km/h) • Pushing the RES (+) button once will result in To Increase Speed Push the ON/OFF button. The Cruise Indicator a 1 km/h increase in set speed. Each subse- Light in the instrument cluster display will illu- When the Speed Control is set, you can increase quent tap of the button results in an increase minate.

• Page 117: To Accelerate For Passing

  PARKSENSE REAR PARK ASSIST — • If the button is continually pushed, the set On steep hills, a greater speed loss or gain may speed will continue to decrease until the but- occur so it may be preferable to drive without IF EQUIPPED ton is released, then the new set speed will be Speed Control.

• Page 118: Parksense Sensors

  ParkSense Sensors Refer to "Instrument Cluster Display" in "Get- ParkSense System Usage Precautions ting To Know Your Instrument Panel" in the The four ParkSense sensors, located in the rear NOTE: Owner's Manual for further information. fascia/bumper, monitor the area behind the ve- •...

• Page 119: Parkview Rear Back Up Camera

  • Clean the ParkSense sensors regularly, taking WARNING! CAUTION! care not to scratch or damage them. The blind spots before backing up. You are all. Obstacles located above or below the sensors must not be covered with ice, snow, responsible for safety and must continue to sensors will not be detected when they are slush, mud, dirt or debris.
• Page 120 When the vehicle is shifted out of REVERSE, NOTE: assist with aligning to a hitch/receiver. The the rear camera mode is exited and the last The programmable features of the ParkView static grid lines will show separate zones that selected touchscreen appears again. Rear Backup Camera can be selected through will help indicate the distance to the rear of the the touchscreen.

• Page 121: Refueling The Vehicle

  REFUELING THE VEHICLE NOTE: CAUTION! • When the fuel nozzle "clicks" or shuts off, the The gas cap is located behind the fuel filler door • Damage to the fuel system or emissions fuel tank is full. on the left side of the vehicle. If the gas cap is control system could result from using an •...

• Page 122: Materials Added To Fuel

  TRAILER TOWING Materials Added To Fuel Indiscriminate use of fuel system cleaning agents should be avoided. Many of these mate- Trailer Towing Weights (Maximum Trailer rials intended for gum and varnish removal may Designated TOP TIER De- contain active solvents or similar ingredients. Weight Ratings) tergent Gasoline contains These can harm fuel system gasket and dia-...

• Page 123: Recreational Towing

  RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF The Ground All Models Flat Tow NONE NOT ALLOWED Front Dolly Tow NOT ALLOWED Rear On Trailer BEST METHOD NOTE: 2. Drive the front wheels onto the tow dolly. CAUTION! When towing your vehicle, always follow appli- 3.
• Page 125 IN CASE OF EMERGENCY IN CASE OF EMERGENCY BULB REPLACEMENT ....124 GEAR SELECTOR OVERRIDE ..145 Spare Tire Removal Instructions ..131 Preparations For Jacking .

• Page 126: Bulb Replacement

  BULB REPLACEMENT Replacement Bulbs Interior Bulbs Bulb Number Center & Rear Dome Lamp Center & Rear Reading Lamps Front Door Courtesy Lamp Front Header Reading Lamps – If Equipped Instrument Cluster Lamps PC74 Liftgate Lamp(s) Overhead Console Reading Lamps PC579 Removable Console Lamp –...

• Page 127: Fuses

  Bulb Number Center High-Mounted Stop Lamp LED (Serviced at authorized dealer) Backup Lamp 3157 License NOTE: WARNING! CAUTION! All of the interior bulbs are glass wedge base or • Before replacing a fuse, make sure that the glass cartridge types. Aluminum base bulbs are •...
• Page 128 Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green – Power Folding Seat 30 Amp Pink – Power Liftgate Module 30 Amp Pink – Rear Door Module 25 Amp Clear – Driver Door Node 25 Amp Clear – Passenger Door Node 40 Amp Green –...
• Page 129 Cavity Cartridge Fuse Mini-Fuse Description – 20 Amp Yellow Vacuum Pump Motor – 25 Amp Clear Inverter Power Outlet #1 (ACC), Rain Sensor, Cigar Lighter (Instrument Panel or – 20 Amp Yellow with Console Rear) – 20 Amp Yellow Power Outlet #2 (BATT/ACC SELECT) – Center Seat or with Console Rear –...
• Page 130 Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Horn – 10 Amp Red Horn – 25 Amp Clear Rear Wiper – 20 Amp Yellow Fuel Pump – 10 Amp Red Power Mirror Switch, Driver Window Switch – 10 Amp Red Wireless Control Module, Keyless Entry Module –...

• Page 131: Jacking And Tire Changing

  JACKING AND TIRE CHANGING Jack Location Spare Tire Tools If equipped, the jack, jack handle and winch The tool pouch contains three pieces and can be WARNING! handle tools are stowed behind the rear left side assembled into a spare tire hook; to remove the trim panel in the rear cargo area.

• Page 132: To Access Spare Tire Winch Drive Nut

  Super Console 2. Open the front drawer to expose the storage compartment. For vehicles equipped with the Super Console, the spare tire winch assembly drive nut is lo- cated beneath the console. Assembling The Spare Tire Hook 1 — Spare Tire Hook/T-handle 2 —...

• Page 133: Spare Tire Removal

  3. Remove the liner from the console's storage Spare Tire Removal Instructions compartment to access the spare tire winch The spare tire is located under the vehicle be- drive nut. neath the center console area. Winch Cover Location Spare Tire Removal The spare tire is stowed inside a protective cover Spare Tire Carrier located under the center of the vehicle between...
• Page 134 4. Stand the tire/cover assembly upright and CAUTION! remove the wheel spacer by squeezing the winch retaining tabs together. Push the re- The winch mechanism is designed for use tainer through the spare tire to release it with the winch T-handle only. Use of an air from the wheel.

• Page 135: Preparations For Jacking

  Preparations For Jacking WARNING! 1. Park the vehicle on a firm, level surface. • Turn on the Hazard Warning flasher. Avoid ice or slippery areas. • Block the wheel diagonally opposite the wheel to be raised. WARNING! • Apply the parking brake firmly and shift an automatic transmission to PARK;...
• Page 136 1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. There are two jack engagement locations on each side of the vehicle body. These loca- tions are on the sill flange of the vehicle body.
• Page 137 NOTE: WARNING! In some situations the jack may need to be placed on its side in order to be pushed Raising the vehicle higher than necessary under the vehicle. Return the jack to its can make the vehicle less stable. It could slip correct orientation once it is under the off the jack and hurt someone near it.

• Page 138: Securing The Compact Spare Tire

  8. Finish tightening the lug nuts. Push down on 11. Stow the cable and wheel spacer before WARNING! the wrench while at the end of the handle for driving the vehicle. Reassemble the winch increased leverage. Tighten the lug nuts in a handle extensions to form a "T"...

• Page 139: Road Tire Installation

  under the vehicle to ensure the compact WARNING! spare tire/cover assembly is positioned cor- rectly against the underside of the vehicle. Verify that both retainer tabs of the wheel spacer have been properly extended through CAUTION! the center of the wheel and compact spare tire/cover assembly.

• Page 140: Tire Service Kit - If Equipped

  TIRE SERVICE KIT — IF 2. Install the remaining lug nuts with the cone WARNING! shaped end of the nut toward the wheel. EQUIPPED Lightly tighten the lug nuts. To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until Your vehicle may be equipped with a Tire Ser- WARNING! the vehicle has been lowered.
• Page 141 Tire Service Kit And Components And Operation Selecting Sealant Mode Push in the Mode Select Knob and turn to this position to inject the Tire Service Kit Sealant and to inflate the tire. Using The Power Button Push and release the Power Button once to turn On the Tire Service Kit.
• Page 142 • When the Tire Service Kit sealant is in a liquid WARNING! WARNING! form, clean water, and a damp cloth will injuries that are serious or fatal to you, your remove the material from the vehicle or tire • Do not attempt to seal a tire on the side of passengers, and others around you.
• Page 143 Sealing A Tire With Tire Service Kit 3. Remove the cap from the valve stem and If the sealant (white fluid) does not flow within 0 then screw the fitting at the end of the – 10 seconds through the Sealant Hose: Whenever You Stop To Use Tire Service Kit: Sealant Hose onto the valve stem.
• Page 144 If the sealant (white fluid) does flow through the If the tire inflates to the recommended pressure WARNING! Sealant Hose: or is at least 26 psi (1.8 Bar) pressure within 15 minutes: Tire Service Kit is not a permanent flat tire 1.

• Page 145: Jump Starting

  5. Uncoil the Hose and screw the fitting at the 3. Place the Tire Service Kit in its proper stor- NOTE: end of the hose onto the valve stem. age area in the vehicle. • For sealant bottle installation, follow these 6.

• Page 146: Preparations For Jump Start

  CAUTION! WARNING! WARNING! Do not use a portable battery booster pack or Do not allow vehicles to touch each other as • Take care to avoid the radiator cooling fan any other booster source with a system volt- this could establish a ground connection and whenever the hood is raised.

• Page 147: Gear Selector Override

  3. Connect the negative (-) end of the jumper 6. Once the engine is started, remove the CAUTION! cable to the negative (-) post of the booster jumper cables in the reverse sequence: battery. Accessories plugged into the vehicle power Disconnecting The Jumper Cables outlets draw power from the vehicle's battery, 4.

• Page 148: If Your Engine Overheats

  IF YOUR ENGINE OVERHEATS NOTE: There are steps that you can take to slow down In any of the following situations, you can re- an impending overheat condition: duce the potential for overheating your engine • If your Air Conditioner (A/C) is on, turn it off. by taking the appropriate action.

• Page 149: Freeing A Stuck Vehicle

  FREEING A STUCK VEHICLE Push the "ESC Off" switch, to place the Elec- CAUTION! tronic Stability Control (ESC) system in "ESC If your vehicle becomes stuck in mud, sand, or Partial Off" mode, before rocking the vehicle. • When "rocking" a stuck vehicle by shifting snow, it can often be moved using a rocking Refer to "Electronic Brake Control"...

• Page 150: Towing A Disabled Vehicle

  TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground ALL MODELS Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL • 25 mph (40 km/h) max speed Rear •...

• Page 151: Enhanced Accident Response System

  EVENT DATA RECORDER (EDR) • The towing distance must not exceed CAUTION! 15 miles (24 km). wheels on the ground can cause severe trans- This vehicle is equipped with an Event Data • The towing speed must not exceed 25 mph mission damage.
• Page 153 SERVICING AND MAINTENANCE SERVICING AND MAINTENANCE SCHEDULED SERVICING ... . .152 TIRES ..... .157 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES .

• Page 154: Scheduled Servicing

  SCHEDULED SERVICING performed by someone other than your autho- Once A Month Or Before A Long Trip: rized dealer, the message can be reset by refer- • Check engine oil level. Your vehicle is equipped with an automatic oil ring to the steps described under "Instrument •...

• Page 155: Maintenance Plan

  Maintenance Plan Required Maintenance Intervals. Refer to the maintenance schedules on the following page for the required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Change oil and filter. • Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. •...
• Page 156 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect the brake linings, replace as necessary. Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter.
• Page 157 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.

• Page 158: Engine Compartment

  ENGINE COMPARTMENT Engine Compartment — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Battery 9 — Coolant Pressure Cap 5 —...

• Page 159: Raising The Vehicle

  RAISING THE VEHICLE Tire Markings NOTE: • P (Passenger) — Metric tire sizing is based on In the case where it is necessary to raise the U.S. design standards. P-Metric tires have the vehicle, go to an authorized dealer or service letter "P"...
• Page 160 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
• Page 161 EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or • C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load –...
• Page 162 EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) • 01 means the year 2001 • Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991 Tire Terminology And Definitions Term...
• Page 163 Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in the The proper cold tire inflation pressure is listed vehicle. on the driver's side B-Pillar or the rear edge of the driver's side door.
• Page 164 To determine the maximum loading conditions (4) The resulting figure equals the avail- Metric Example For Load Limit of your vehicle, locate the statement "The com- able amount of cargo and luggage load For example, if "XXX" amount equals 635 kg bined weight of occupants and cargo should capacity.

• Page 166: Tires - General Information

  Safety NOTE: WARNING! • Unequal tire pressures from side to side may WARNING! Overloading of your tires is dangerous. Over- cause erratic and unpredictable steering re- loading can cause tire failure, affect vehicle sponse. • Improperly inflated tires are dangerous handling, and increase your stopping dis- and can cause collisions.
• Page 167 At least once a month: Check tire pressures more often if subject to a hicle loading may be required for high-speed wide range of outdoor temperatures, as tire vehicle operation. Refer to an authorized tire • Check and adjust tire pressure with a good dealer or original equipment vehicle dealer for pressures vary with temperature changes.
• Page 168 Tread Wear Indicators Tire Repair It is not recommended driving a vehicle loaded at full capacity or to tow a trailer while a tire is in If your tire becomes damaged, it may be re- Tread wear indicators are in the original equip- the run flat mode.
• Page 169 Life Of Tire Keep dismounted tires in a cool, dry place with It is recommended you contact an authorized as little exposure to light as possible. Protect tire dealer or original equipment dealer with any The service life of a tire is dependent upon tires from contact with oil, grease, and gasoline.

• Page 170: Tire Types

  Summer Or Three Season Tires — If Snow Tires WARNING! Equipped Some areas of the country require the use of overloading and failure. You could lose Summer tires provide traction in both wet and snow tires during the Winter. Snow tires can be control and have a collision.

• Page 171: Spare Tires - If Equipped

  Compact Spare Tire — If Equipped studded tires. Some states prohibit studded WARNING! tires; therefore, local laws should be checked The compact spare is for temporary emergency before using these tire types. Compact and collapsible spares are for tem- use only. You can identify if your vehicle is porary emergency use only.

• Page 172: Wheel And Wheel Trim Care

  Full Size Spare — If Equipped Since this tire has limited tread life, the original WARNING! equipment tire should be repaired (or replaced) The full size spare is for temporary emergency use and reinstalled on your vehicle at the first op- Limited use spares are for emergency use only.
• Page 173 Your wheels are susceptible to deterioration Mopar Wheel Treatment or Mopar Chrome Cleaner Dark Vapor Chrome, Black Satin Chrome, or Low caused by salt, sodium chloride, magnesium or their equivalent is recommended or select a Gloss Clear Coat Wheels non-abrasive, non-acidic cleaner for aluminum or chloride, calcium chloride, etc., and other road chrome wheels.

• Page 174: Department Of Transportation Uniform Tire

  DEPARTMENT OF depends upon the actual conditions of Temperature Grades their use, however, and may depart sig- TRANSPORTATION UNIFORM TIRE The Temperature grades are A (the high- nificantly from the norm due to varia- QUALITY GRADES est), B, and C, representing the tire's tions in driving habits, service practices, resistance to the generation of heat and The following tire grading categories...
• Page 175 WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combi- nation, can cause heat buildup and possible tire failure.
• Page 177 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS WHEEL AND TIRE TORQUE SPECIFICATIONS . .176 FLUID CAPACITIES ....177 Chassis.....179 Torque Specifications .

• Page 178: Wheel And Tire Torque Specifications

  WHEEL AND TIRE TORQUE FLEXIBLE FUEL (3.6L ENGINE SPECIFICATIONS ONLY) Proper lug nut/bolt torque is very important to en- E-85 General Information sure that the wheel is properly mounted to the The information in this section is unique for vehicle. Any time a wheel has been removed and Flexible Fuel vehicles only.

• Page 179: Fluid Capacities

  FLUID CAPACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.6L Engine (SAE 5W-20, API Certified). 6 Quarts 5.6 Liters Cooling System * 3.6L Engine (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula or equivalent) 13.4 Quarts 12.6 Liters meeting the requirements of FCA Material Stan- dard MS.90032.
• Page 180 Component Fluid, Lubricant, Or Genuine Part Spark Plugs We recommend you use Mopar Spark Plugs. Fuel Selection – 3.6L Engine 87 Octane, 0-15% Ethanol. Fuel Selection – 3.6L Flex Fuel 87 Octane, Up to 85% Ethanol. (E-85) Engine CAUTION! CAUTION! CAUTION! rust products, as they may not be compat- compatible"...

• Page 181: Chassis

  We recommend you use Mopar Power Steering Fluid +4, Mopar ATF+4 Automatic Transmission Fluid meeting the requirements of FCA Material Standard MS-9602. In choosing Authentic Accessories you gain far For the full line of Authentic Dodge Accessories MOPAR ACCESSORIES more than expressive style, premium protec-...
• Page 182 INTERIOR: • Storage Tote • Door Sill Guards • Cargo Tray • All Weather Mats • Ambient Light Kit • Cargo Floor Liner • Spare Tire Kit • Premium Carpet Floor Mats ELECTRONICS: • Park Distance Sensors • Remote Start •...
• Page 183 MULTIMEDIA MULTIMEDIA CYBERSECURITY ....182 Radio Operation....192 Operation Of The Remote Control..202 CD/DVD Disc Operation .

• Page 184: Cybersecurity

  CYBERSECURITY The risk of unauthorized and unlawful access to NOTE: your vehicle systems may still exist, even if the • FCA US LLC or your dealer may contact you Your vehicle may be a connected vehicle and most recent version of vehicle software (such as directly regarding software updates.

• Page 185: Radio 130

  RADIO 130 Uconnect 130 1 — CD Eject Button 9 — Set Clock Button 2 — SEEK Down Button 10 — Audio Settings/Rotate To Tune 3 — SEEK Up Button 11 — Radio Sales Code 4 — AM/FM Button 12 — Audio Jack 5 —...

• Page 186: Clock Setting

  NOTE: Equalizer, Balance And Fade • A second station may be added to each push button. Push the SET/RND or SET (depend- • Your radio has many features that add to the 1. Push the TUNE/SCROLL control knob and ing on the radio) button twice and SET 2 will comfort and convenience for you and your "BASS"...

• Page 187: Audio Jack Operation

  Audio Jack Operation The AUX/Audio Jack provides a means to con- nect a portable audio device, such as an MP3 player or an iPod, to the vehicle's sound system. This requires the use of a 3.5 mm stereo audio patch cable. Pushing the AUX button will change the mode to auxiliary device if the Audio Jack is con- nected, allowing the music from your portable...

• Page 188: Radio 130 With Satellite Radio

  RADIO 130 WITH SATELLITE RADIO Uconnect 130 With SiriusXM Satellite Radio 1 — CD Eject Button 12 — Audio Jack 2 — SEEK Down Button 13 — Set Preset/CD Random Play 3 — SEEK Up Button 14 — Station Preset Buttons 4 —...

• Page 189: Clock Setting

  NOTE: 5. Push the TUNE/SCROLL control knob to Store Radio Presets Manually save the changes. • Tune to the desired station. • Your radio may not be equipped with the 6. Push any button/knob or wait five seconds to Uconnect Voice Command and Uconnect •...

• Page 190: Cd/Disc Operation

  SETUP Button LIST Button • Pushing the SETUP button allows you to se- • Push the LIST button to bring up a list of all lect between items that are available in that folders on the CD. Scroll up or down the list by particular mode.

• Page 191: Uconnect 430/430N

  UCONNECT 430/430N Uconnect 430/430N 1 — Voice Command Button 7 — Audio Jack 2 — Open/Close Display 8 — Radio Sales Code 3 — MENU Button 9 — ON/OFF/Rotate For Volume 4 — AUDIO Settings Button 10 — Select MEDIA Mode Button 5 —...

• Page 192: Clock Setting

  NOTE: 3. To adjust the hours, press either the "Hour Equalizer, Balance And Fade Forward" or "Hour Backward" button on the • Your radio may not be equipped with the Audio Control Menu touchscreen. Uconnect Voice Command and Uconnect Phone features. To determine if your radio has 4.
• Page 193 Display Settings • Select the "Nighttime Colors" button on the touchscreen to switch to manual nighttime mode and to adjust the brightness of the display using nighttime colors. • Select the "Auto Color Mode" button on the touchscreen to switch to automatic daytime/ nighttime mode and to control the brightness of the display using the dimmer switch of the vehicle.

• Page 194: Radio Operation

  Radio Operation Radio Operation 1 — Radio Tuner Tabs 6 — Station Scan 2 — Individual Presets 7 — Seek Down 3 — Search/Browse 8 — Direct Tune 4 — Radio Station/Track Info 9 — Seek Up 5 — Sort Presets...
• Page 195 • To access Radio Mode, push the RADIO but- • Once the desired station is found, press and ton on the left side of the faceplate, then press hold one of the "PRESETS" buttons on the the "AM," "FM" or "SAT" button on the touchscreen in the list to the right, until the touchscreen to select the band.

• Page 196: Cd/Dvd Disc Operation

  CD/DVD Disc Operation CD/DVD Disc Operation 1 — Media Source Tabs 6 — Track Scan 2 — Folder/Track 7 — Seek Down 3 — Open Folder 8 — Play/Pause 4 — Track Information 9 — Seek Up 5 — Sort Tracks...

• Page 197: Audio Jack Operation

  • Push the MEDIA button on the faceplate to reached; if still held it will fast-forward Hard Disk Drive (HDD) Operation display the media source tabs at the top of the through the next sequential track(s) (if ran- • The Hard Disk Drive (HDD) mode gives you dom play mode is not active) until released.
• Page 198 Copying Music From CD Copying Music From USB NOTE: The copy progress is shown in the lower left • Push the LOAD button on the faceplate. • The USB port on the radio face plate allows corner of the screen. you to copy files to your hard drive.

• Page 199: Cleaning Your Touchscreen Radio

  NOTE: • A check mark in the My Pictures screen indi- cates the currently used picture. • You can also delete pictures by pressing the "Delete" button on the touchscreen. Playing Music From The HDD • Push the MEDIA button on the faceplate to Copying Pictures To The HDD Browsing Music From The HDD display the media source tabs at the top of the...

• Page 200: Garmin Navigation

  Garmin Navigation 4. While the navigation system is speaking, use • Select a category, then a subcategory, if nec- essary. the ON/OFF VOLUME rotary knob to adjust • Uconnect 430N integrates Garmin's the volume to a comfortable level. Please • Select your destination and press the "Go" consumer-friendly navigation into your ve- note the volume setting for Navigation Voice button on the touchscreen.

• Page 201: Following Your Route

  Setting Your Home Location Following Your Route Adding A Via Point • From the main navigation menu, press the To add a stop between the current location and Your route is marked with a magenta line on the "Tools" icon. Select the "My Data" folder icon, the end destination (Via Point), you must be map.

• Page 202: Tips Controls And General Information

  TIPS CONTROLS AND GENERAL Taking A Detour Right Switch INFORMATION • Push the switch up or down to increase or To take a detour, you must be navigating a route. decrease the volume. • Press the "back arrow" icon button on the Steering Wheel Audio Controls •...

• Page 203: Care And Maintenance

  Care And Maintenance control unit (Body Computer) is replaced, the • The remote USB port, located within the up- system will ask the user to enter the secret code. per glove compartment, allows you to plug an Observe the following precautions to ensure the iPod into the vehicle's sound system.

• Page 204: Video Entertainment System (Ves)

  VIDEO ENTERTAINMENT SYSTEM • The iPod battery charges when plugged into Operation Of The Touchscreen Radio/DVD the USB port (if supported by the specific Player/Blu-Ray Player (VES) audio device). To view a DVD, push the OPEN/CLOSE or LOAD • Compatible iPod devices may also be control- System Operation button on the faceplate and insert the disc.

• Page 205: Auxiliary Audio/Video Input Jacks

  UCONNECT PHONE Connect the video game or other external media NOTE: devices to the AUX jacks following the color The Uconnect Phone requires a mobile phone The Uconnect Phone is a voice-activated, coding for the VES jacks. equipped with the Bluetooth Hands-Free Pro- hands-free, in-vehicle communications system file, Version 1.0 or higher.

• Page 206: Phonebook

  4. After the BEEP, say "setup" or "Uconnect • Next you will be asked to give this new pairing Phonebook a priority of 1 through 7 (up to seven phones device setup." Phonebook Download — Automatic Phonebook may be paired); 1 is the highest and 7 is the 5.

• Page 207: Making A Phone Call

  NOTE: Making A Phone Call Changing The Volume The mobile phone may require authorization • Push the "Phone" button • Start a dialogue by pushing the "Phone" but- prior to download. , then adjust the volume during a • After the BEEP, say "dial" (or "call" a name). •...

• Page 208: General Information

  UCONNECT VOICE COMMAND General Information you ever want to interrupt the system while it lists options, push the "Voice Command" but- The following regulatory statement applies to all Voice Command Operation , listen for the BEEP, and say your Radio Frequency (RF) devices equipped in this command.
• Page 209 While In: Voice Command Example: "Radio AM" (to switch to the AM radio mode) "Radio FM" (to switch to the FM radio mode) "Satellite Radio" (to switch to the Satellite radio mode) "Disc" (to switch to the disc mode) Main Menu "USB"...
• Page 210 While In: Voice Command Example: "Track" (#) (to change the track) "Next Track" (to play the next track) Disc Mode "Previous Track" (to play the previous track) "Main Menu" (to switch to the main menu) To switch to the voice recorder mode, say "Memo." The following are common voice commands for this mode: "New Memo"...

• Page 211: Voice Text Reply

  Voice Text Reply NOTE: To access the tutorial, push the "Voice Com- If equipped with Uconnect Voice Command, mand" button . After the BEEP, say "tu- your Uconnect 430N radio may be able to play torial." Push any button on the faceplate or incoming Short Message Service (SMS) mes- press any button on the touchscreen to cancel sages (text messages) through the vehicle's...
• Page 213 CUSTOMER ASSISTANCE CUSTOMER ASSISTANCE IF YOU NEED ASSISTANCE... .212 Customer Assistance For The Hearing Or In The 50 United States And Washington, Speech Impaired (TDD/TTY)..213 D.C.

• Page 214: If You Need Assistance

  IF YOU NEED ASSISTANCE Any communication to the manufacturer's cus- In Mexico Contact tomer center should include the following infor- Av. Prolongacion Paseo de la Reforma, 1240 The manufacturer and its authorized dealer are mation: vitally interested in your satisfaction. We want Sante Fe C.P.

• Page 215: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)

  Customer Assistance For The Hearing Or manufacturer stands behind only the manufac- We appreciate that you have made a major turer's service contracts. If you purchased a investment when you purchased the vehicle. An Speech Impaired (TDD/TTY) manufacturer's service contract, you will receive authorized dealer has also made a major invest- To assist customers who have hearing difficul- Plan Provisions and an Owner Identification...

• Page 216: Reporting Safety Defects

  • You can purchase a copy of the Owner's Manual, Navigation/Uconnect Manuals or Warranty Book- To contact NHTSA, you may call the Vehicle let. United States customers may visit the Dodge Safety Hotline toll free at 1-888-327-4236 Contact Us page at www.dodge.com scroll to (TTY: 1-800-424-9153);...
• Page 217 INDEX Accessories ....179 Antifreeze (Engine Coolant) ..177 Bulb Replacement ....124 Mopar .
• Page 218 Using The Top Tether Anchorage ..103 Door Ajar Light....54, 55 Exhaust Gas Cautions ... .105 Cleaning Door Opener, Garage .
• Page 219 Octane Rating ....177 Hood Release ....38 Hood .....38 Specifications .
• Page 220 Security Alarm ....55 Mopar .....179 ParkSense System, Rear...115 Service .
• Page 221 Reminder, Seat Belt ....69 Child Restraints ....89 Service Contract ....213 Remote Keyless Entry Energy Management Feature .
• Page 222 Supplemental Restraint System - Air Bag . .81 Spare Tire ....131 UCI Connector ....201 Spare Tires .
• Page 223 Windshield Defroster ... . .106 Windshield Washers ....26 Windshield Wipers ....26 Wipers, Intermittent .
• Page 227 Thi s gui de has been pr epar ed t o hel p y ou get qui ckl y acquai nt ed wi t h y our new Dodge br and vehi cl e and t o pr ovi de D R I V I N G A N D A L C O H O L a conveni ent r ef er ence sour ce f or com mon quest i ons.
• Page 228 D OD GE. CA ( C AN AD A) instructions to select the applicable year, make and model of your vehicle. ©2 018 FCA US LLC. ALL RI GHTS RESERVED. DODGE I S A REGI STERED TRADEMARK OF FCA US L LC.

2018 Dodge Grand Caravan Compass Without Navigation

Source: https://www.manualslib.com/manual/1439440/Dodge-Grand-Caravan-2018.html

Share this post